Installation manual

Page 27
AmeriGlide Vesta Installation Guide
Install optional ip-up rail (as required)
Follow these steps if the unit has the optional ip-up
rail section.
Refer to STEP 5 earlier in this guide for the standard
track installation procedure. This section provides
information on the optional ip-up rail section only.
1. Attach the special mounting bracket to the ip-
up rail section (Figure 61).
STEP 18
Figure 63
Figure 61
Figure 62
Bracket
Foot Plate
Face Plate
2. Trace the foot plate location on the oor (Fig-
ure 62).
3. Screw in the foot plate according to the tracing
on the oor (Figure 63).