Use and Care Manual

BS43BSET Bar Stool Assembly

Instructions

Max Weight Capacity 330 Lb

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website

http://www.amerihomebrand.com or call Customer Service at

1-888-287-6981, Monday-Friday,

8 AM - 4 PM Central Time, or email : info@amerihomebrand.com. A copy of the sales receipt is required.

KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE.

Remove Black Cap

Discard Before Assembly

ATTENTION!

Base

(E)

Handle

Foot Cap

(G)

Support

Cylinder (C)

Seat (F)

Support

Cylinder (B)

PAGE 1
BS43BSET Bar Stool Assembly Instructions Max Weight Capacity 330 Lb READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
ASSEMBLY INSTRUCTION 3A 1. Use a hex wrench to attach the Support Cylinder (C) to the underside of the Seat (F) with the provided hex bolts. 1 2. Locate Black Cap on Support Cylinder. 3A. A Black Cap protects the hydraulic mechanism on the Support Cylinder (B). 3B Remove the Black Cap and discard it before assembly. The Orange hydraulic button will become visible. 4 3B 4. Insert the Support Cylinder (B) into the Support Cylinder (C) and press firmly. 5 Set the Foot Cap (G) over the hole in the Base.