Instructions / Assembly

Bar Stool & Table Assembly Instructions 201107

Max Weight Capacity 330 Lb

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website

http://www.buffalotools.com

or call Customer Service at 1-888-287-6981, Monday-Friday,

8 AM - 4 PM Central Time. A copy of the sales receipt is required.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE.

Foot

Rest

Foot Cap

Support Cylinder

Seat

Seat Plate

Screws

Handle

PAGE 1
Bar Stool & Table Assembly Instructions 201107 Max Weight Capacity 330 Lb READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
ASSEMBLY INSTRUCTION For proper assembly, follow the instructions below. Use an allen wrench to attach the Seat Plate to the underside of the Seat with the provided Screws. Insert the Support Cylinder into the center of the Seat Plate Place the Foot Cap over the Footrest. Insert the Support Cylinder into the center hole of the Footrest, and press down FIRMLY. To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the Seat.