Installation Guide

Screw to gutter

For more information on other innovative products

please visit www.amerimax.com

For outside corners (A) or inside corners (B),

mitre cut both adjoining sections. Notch the

front edge of one section to create an overlap.

Outside

Corner

Inside

Corner

(A)

(B)

Using self-tapping exterior grade gutter or sheet metal screws,

screw the gutter cover to the lip of the gutter through the

pre-drilled holes (2 screws per 3 foot section of gutter cover).

2 screws per 3 foot section of gutter cover

Continue installing the gutter cover sections end to end.