® ©AMERIPHONE products are manufactured by Walker, A Division of Plantronics, Inc. 12082 Western Avenue, Garden Grove, CA 92841 (800) 874-3005 VOICE • (800) 772-2889 TTY/TDD • (714) 897-4703 FAX email: ameriphonecs@plantronics.com website: www.ameriphone.
® XL E N G L I S H The Extra Powerful XL-50 AMPLIFIED TELEPHONE with lighted keypad! F R A N Ç A I S Users’ Guide M46902 XL-50 © AMERIPHONE® XL-50 5270-2911 ∆ A 4/03
Important Safety IMPORTANT INSTRUCTIONS Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and persons including the following: 1.Read and understand all instructions. 2.Follow all warnings and instructions marked on the telephone. 3.Do not use this telephone near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool or anywhere else there is water. 4.
Important Safety Instructions apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 14. Unplug this product from the wall outlets and refer servicing to the manufacturer under the following conditions: A. When the power supply cord or plug is frayed or damaged. B. If liquid has been spilled into the product. C. If the telephone has been exposed to rain or water. D.
Important Safety Instructions label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operational and safety requirements. The Department does not guarantee that the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
Contents Introducing the XL-50 Warranty Service ..............................................................................1 Sales Receipt ....................................................................................1 Help from Ameriphone ......................................................................1 Package Checklist..............................................................................2 Features ....................................................................................
Introducing the XL-50 Thank you for selecting the XL-50 Amplified Telephone from Ameriphone. These Operating Instructions and the associated Quick Operating Guide provide you with the information you need to use your XL-50 effectively, easily and safely. Read this manual thoroughly before using your telephone. Keep the manual near the telephone for easy reference. Warranty Service Your telephone is designed to provide years of quality service.
E N G L I S H Package Checklist Handset Base Unit Telephone Line Cords XL-50 OPERATING INSTRUCTIONS AND QUICK GUIDE Handset Coil Cord Mounting Bracket Figure 1 - Package Components AC Adapter Operating Guides 2
Features on the XL-50 RINGER volume switch AUDIO OUTPUT jack AC adapter and phone line connection TONE/PULSE switch RING TONE switch Phone number directory MEMORY button REDIAL button FLASH button HOLD button TONE slider HOLD indicator 3 VOL volume slider LOW BATTERY indicator RING flasher AMPLIFY button AMPLIFY/MISSED CALLS/ VOICE MAIL/EXTENSION IN USE indicator PROG program button Figure 2 - Base Unit Controls
E N G L I S H Setting up Your XL-50 There are five initial steps involved in setting up your XL-50. 1. Insert four AA alkaline batteries for back-up in case of AC power outage. 2. Decide if you want the phone to sit on a desk or hang on the wall. 3. Connect the telephone components. 4. Program up to 12 telephone numbers to call with the press of a memory button. 5.
Setting up Your XL-50 (continued) Setting the Dialing Mode Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have rotary dialing. Connecting for Desk or Wall Mount For Desktop Use 1. Connect one end of the telephone line cord to the “Line” jack on the back of the XL-50 and the other end to the phone outlet on your wall. Connect the handset cord to the telephone as shown in Figure 5.
E N G L I S H Setting up Your XL-50 (continued) phone's mounting bracket. MANUAL AUTO Figure 7 - Mounting Bracket for Wall Mounting 3. Locate a desired wall phone jack near an AC outlet and hold phone upright. 4. Plug the short phone line cord into the wall outlet as shown in Figure 8. - Short phone line cord MANUA 6. Once the lower nail head has been inserted, insert the UPPER nail head into the phone's bracket and slide the phone down until it is firmly in place on the wall. 7.
Using Your XL-50 Incoming Voice Volume 7 USE WITH CAUTION 2. Adjust the ear piece volume while on a call by moving the VOL slide control in Figure 10. With AMPLIFY on, incoming volume will be up to 48dB louder. Caution: Repeated incremental exposure to amplification levels greater than 18 dB may be harmful to individuals without hearing disabilities. Therefore, do not remove the warning label attached to the back of the handset.
E N G L I S H Using Your XL-50 (Continued) Note: In standard use, the amplifier turns off when you hang up the telephone. This is a useful feature if many people use the phone. If you want the amplifier to always remain on, slide the Volume Reset Override switch on the bottom of the phone to ON, as shown in Figure 11. - OFF MANUAL AUTO - ON Volume Reset Override * HOLD 0 PROG # FLASH REDIAL AMPLIFY TONE VOL LO HI Figure 12 - Tone Slide Control Ringer Volume and Tone 1.
Using Your XL-50 (Continued) Note: If you pick up an extension phone on the same line when the XL-50 is on HOLD, the XL-50 will release the HOLD, and you can continue your conversation on the extension phone. Figure 14 - Hold Button and Indicator Last Number Redial To redial the last number called, lift the handset and press REDIAL. The phone will redial up to 31 digits.
E N G L I S H Special Features Unanswered Call/Voice Mail Message Light If you subscribe to voice mail messaging with your telephone company, this light flashes if you have a message waiting. Figure 17 - Voice Mail Indicator Note: To turn the Voice Mail feature on or off, adjust the switch underneath the phone. VMAIL MISSED CALL OFF Figure 18 - Voice Mail Switch If you do not have voice mail service, the same indicator functions as a missed call indicator.
Special Features (continued) To program a button, follow these steps: 1. Lift the handset and press PROG as shown in Figure 20. Figure 20 - PROG Button 2. Enter the phone number on the keypad (Figure 21) just as you would dial it normally. Note: Press REDIAL if you want to insert a brief pause between two numbers. 4. Press a memory button (Figure 19) to store this number on that button. 5. Immediately hang up the handset. Note: Any number previously stored at that memory button will be overwritten. 6.
E N G L I S H Special Features (continued) To use this port, plug in a compatible cable and connect it to your assistive listening device. Speak into the handset when you use the Audio Output connection. Cochlear Implant Adapter Cord A cochlear adapter cord is available from Ameriphone that can be used to directly connect the XL-50 to a speech processor.
Regulatory Compliance Part 68 of FCC Rules Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
E N G L I S H Regulatory Compliance (continued) believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this telephone equipment, for repair or warranty information, please contact Walker / Ameriphone, 1-800874-3005.
Regulatory Compliance (continued) Customer-Owned Coin/Credit Card Phones: To comply with state tariffs, the telephone company must be given notification prior to connection. In some states, the state public utility commission, public service commission or corporation commission must give prior approval of connection. Part 15 of FCC Rules Information This device complies with part 15 of the FCC Rules.
E N G L I S H Regulatory Compliance (continued) (This increases the separation between the telephone equipment and the receiver.) 3.Connect the telephone equipment into an outlet on a circuit difference from that to which the television, radio, or other receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Regulatory Compliance (continued) user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
E N G L I S H 18
Warranty This warranty applies only to Ameriphone products that are purchased and used in the United States or Canada. Ameriphone warrants the XL-50 telephone against any defect in materials or workmanship for the period of one year from the date of purchase. If your Ameriphone product is defective and returned within 30 days of the date of pur-chase, your Ameriphone dealer will replace it at no charge.
E N G L I S H Warranty must prepay all shipping costs. systems. We suggest you save the original package materials in the event you need to ship the XL-50. When shipping for warranty repair, include your name, address, phone number, proof of date of purchase, and a description of the problem. After repairing the product, we, (or the service center) will ship it back to you at no cost within the United States and Canada.
Troubleshooting Chart The chart below will help you solve most problems that may arise during operation of your telephone. Should the difficulty continue, contact Ameriphone or your authorized dealer for assistance. SYMPTOM No dial tone CAUSE AND CORRECTIVE ACTION Check all phone cord connections. No number dialed when memory button pressed No number stored in that memory button. See: “Programming the Memory buttons”, P. 10.
E N G L I S H Index Cochlear Implant Adapter Cord ..................12 Connecting for Desk or Wall Mount Desktop Use ......................5 Wall Mount ......................5 Connecting the Speech Processor ........................12 Direct Audio Output ..............11 Features ................................3 Flash ......................................9 Help from Ameriphone ............1 Hold ......................................8 Incoming Voice Tone ................8 Incoming Voice Volume .........
® XL XL-50 AMPLIFIED TELEPHONE Le téléphone à Amplification très forte et très claireavec clavier eclaire! F R A N Ç A I S Manuel d'utilisation M03699 XL-50 ©AMERIPHONE® XL-50french 5270-2911 ∆ A 4/03
RENSEIGNEMENTS IMPORTANTS SUR LA SÉCURITÉ Lorsque vous utiliserez votre téléphone, suivez toujours les mesures de sécurité de base suivantes afin de réduire les risques d’incendie, de choc électrique et de blessures. 1. Lire et bien comprendre toutes les instructions. Se conformer à tous les avertissements et à toutes les instructions marqués sur l’appareil. 2. Pendant un orage électrique, ne pas utiliser de téléphone autre qu’un téléphone sans cordon.
TABLE DES MATIÈRES CHAPITRE 1: INTRODUCTION ..............................................................................2 CHAPITRE 2: LISTE DES PIÈCES ..............................................................................2 CHAPITRE 3: COMMANDES ET CARACTÉRISTIQUES ................................................3 CHAPITRE 4: INSTALLATION A. Installation sur bureau........................................................................4 B. Installation au mur ..............................
CHAPITRE 1 INTRODUCTION Merci d’avoir choisi le nouveau téléphone XL-50 d’AMERIPHONE, Inc. Ce téléphone a été conçu pour répondre aux normes de qualité les plus élevées afin que vous puissiez l’utiliser sans problème pendant des années. CHAPITRE 2 LISTE DES PIÈCES Veuillez vous assurer que toutes les pièces suivantes se trouvent bien dans la boîte: Warranty Service Lisez attentivement les instructions sui-vantes avant d’utiliser votre téléphone. Conservez ce manuel pour référence ultérieure.
CHAPITRE 3 COMMANDES ET CARACTÉRISTIQUES Volume de la sonnerie Prise audio directe Adapteur et prise téléphonique Composition par Tonalité/Impulsions Tonalité de la sonnerie Répertoire téléphonique F R A N Ç A I S Touches mémoire Touche de Recomposition Commutateur FLASH Bouton de mise en attente Réglage de la tonalité Indicateur de mise en attente Fig.
CHAPITRE 4 INSTALLATION Pour installer et brancher votre téléphone XL-50 sur un bureau ou au mur, suivez les étapes ci-dessous: A. Installation sur bureau M 1 M 2 M 3 M 4 M 7 M 5 M 8 M 6 M 9 M 10 M 11 1. Réglez le sélecteur de mode de composition à T si vous avez le service par tonalité. Réglez le sélecteur sur P pour le mode de composition à impulsions (cadran rotatif). 2. Branchez le cordon de raccordement dans la prise du socle. (Voir fig. 3) 3.
CHAPITRE 4 (SUITE) C. Pile MANU AUTO AL Fig. 5 - Installation de la base du socle Utilisez 4 piles Alkalines AA non rechargeable de (non incuse) pour augmenter la luminosité de la lampe de la sonnerie. Pour installer la pile et afin d’éviter tout choc électrique, débranchez le cordon téléphonique avant d’installer la pile, puis connectez la pile (Fig. 7). Enfin, reconnectez le cordon téléphonique. Répétez ces étapes à chaque fois que vous remplacez une pile usagée.
CHAPITRE 5 UTILISATION DE XL-50 Le téléphone XL-50 a été conçu pour vous faciliter les communications. Il comprend de nombreuses caractéristiques pratiques et faciles à utiliser. ramène au réglage précédent de l’amplificateur, et un voyant rouge s’allume. Lorsque vous raccrochez, la désactivation se fait automatiquement. * A. Amplificateur HOLD 0 O P E PROG # FLASH REDIAL AMPLIFY TONE L’amplificateur augmente le volume de la voix de votre interlocuteur de 0 à plus de 47 décibels.
CHAPITRE 5 (SUITE) Remarque: En mode d'utilisation normale, l'amplificateur s'éteint dès que vous raccrochez. Ceci est très pratique lorsque plusieurs personnes utilisent le même combiné. Si vous désirez que l'amplificateur reste toujours allumé, placez sur ON le bouton de neutralisation d'amplification (Volume Reset Override) situé en dessous de l'appareil (Fig. 10). C. Sélecteur de tonalité Avec le sélecteur de tonalité, vous entendez des sons forts, clairs et faciles à comprendre.
CHAPITRE 5 (SUITE) * HOLD RINGER AUDIO RINGER PITCH 0 PROG Lo Hi T P FLASH REDIAL AMPLIFY TONE VOL LO Lo Med Hi # P E HI OUTPUT Fig. 14 Fig. 12 E. Indicateur Visuel de la sonnerie La lampe de la sonnerie est d’une luminosité normale. Si vous voulez augmenter la luminosité de la lampe losque le téléphone sonne, installez une pile non rechargeable de 9 Volts au dos au téléphone (Chap. 4 sec. C). * HOLD 0 Le téléphone XL-50 enregistre le dernier numéro composé (jusqu’à 31 chiffres).
CHAPITRE 5 (SUITE) touche (un maximum de 15 chiffres par numéro) en suivant les étapes ci-dessous: M1 M7 M2 M8 M3 M9 M4 M10 M5 M11 M6 DIALOGUE XL-40 TM 1 2 Fig. 16 A B C 3 D E F 1. Décrochez et appuyez sur la touche PROG. * HOLD 0 O P E PROG REDIAL AMPLIFY TONE VOL HI Fig. 17 2. Entrez le numéro de téléphone comme si vous le composiez. 1 4 7 G H I Fig. 18 P R S * 2 5 8 0 F R A N Ç A I S NB: Nous vous recommandons de ne pas programmer 911 dans les touches mémoires.
CHAPITRE 5 (SUITE) auxiliaire compatible, puis branchez l’autre bout à votre aide auditive. AUDIO ER PITCH o Hi T P OUTPUT Fig. 19 NB: Parlez dans le combiné du téléphone lorsque vous utilisez la prise audio directe. K. Commutateur La touche commutateur (FLASH) est utilisée pour avoir accès à certains services ou fonctions offerts par votre compagnie de téléphone locale, par exemple, la mise en attente des appels, la conférence à trois, etc. Appuyez sur FLASH pour activer cette fonction.
CHAPITRE 5 (SUITE) M. Cordon pour implant cochléaire Ameriphone peut fournir un cordon servant à brancher directement le XL-50 sur un processeur de parole. DANGER! Pendant un orage, évitez d'utiliser le téléphone; la foudre peut causer une décharge électrique. Avant de brancher un cordon dans le processeur de parole, consultez le fabricant de l'implant. Compatible with ... = Compatible avec appareils XL-30, XL-40, XL-50, VCO, JV-35 et CL-40 Ameriphone.
CHAPITRE 6 EN CAS DE DIFFICULTÉS TEXT Si votre téléphone XL-50 venait à mal fonctionner, consulter le guide de dépannage suivant. Au cas où le problème persisterait, communiquez avec Ameriphone ou votre détaillant autorisé pour obtenir de l’aide. PROBLÈMES 11 CAUSES ET SOLUTIONS Pas de tonalité. Vérifiez tous les cordons de raccordement. Vous appuyez sur une touche de mémorisation, mais rien ne se passe. Aucun numéro n’a été programmé dans cette touche de mémorisation.
CHAPITRE 7 GARANTIE TEXT Cette garantie s’applique seulement aux appareils Ameriphone achetés et utilisés aux États-Unis et au Canada. Ameriphone garantit ce téléphone XL-50 contre tous défauts dans les matières premières et la fabrication pendant l’année suivant la date d’achat. Si votre appareil Ameriphone est défectueux et que vous le retournez dans les 30 jours suivant la date d’achat, votre détaillant le remplacera sans frais.
CHAPITRE 8 DESCRIPTION DE L'APPAREIL DIMENSIONS Taille: 9 1/2" x 7 x 3 1/4" (24.1 x 17.7 x 8.2 cm) Poids: 2.52 lb. (1 Kg) PILE 4 Piles Alkalines de type AA (non incluse) Adapteur 9V, 300 mA INDEX Amplification Réglage du volume ..................6 Appel en garde ............................8 Base du socle ........................2, 4, 5 Boîte vocale ................................10 Commandes et caractéristiques........3 Commutateur ..............................10 Composition des numéros mémorisés.....