Specifications

http://www.ameritron.com 13
AL-82
Specifications:
Input:
Circuit type: Pi-network,
slug tuned coils. Maximum
VSWR at resonance: 1.2:1
Minimum 2:1 VSWR band-
width: 20%. Max. drive
power permissable: 130
Watts. Typical drive rated
output: 100 Watts
Output:
Typical SSB PEP voice
operation: 1500 Watts.
Typical CW continuous
operation: 1500 Watts. 30
second PEP two tone test:
1800 Watts plus. 1/2 hour
PEP two-tone test: 1800
Watts.
Power Supply:
Circuit type: full wave
bridge, capacitor input. No
load voltage: 3600 Volts.
Full load voltage: 3300
Volts. Full load current: .8
Amp. Regulation: 10% or
better. Transformer: 32 lb
HypersilR, capacitors: 26
uFd total, computer grade.
Maximum draw at rated
output: 13 Amps. AC
Input: 240 V, 50/60 Hz.
Tubes:
Type: 3-500 Classic (2).
Continuous dissipation:
1000 Watts. Warm-up time:
5 seconds.
Metering:
Multimeter: Plate current,
plate voltage, drive/ALC,
power output (PEP Watts).
Grid Meter: Reads PA grid
current
ALC:
Negative going, 0-20 V,
phono jack
Efficiency CW: 65% typical.
*Efficiency SSB (envelope
crest): 62% typical.
MARS/WARC:
Yes, set to the nearest band.
Connectors:
Keying: engages amplifier
when grounded. +12 VDC
open circuit and supplies 100
mA when grounded. A built-
in back-pulse cancelling
diode protects the exciter.
RF input:
SO-239, 50 Ohm input.
Power:
NEMA 6-15P, 240 Volts.
Dimensions:
18
1
/
2
Dx17Wx10H inches.
Operating Weight:
76 pounds.
Shipping Weight:
Unit, 50 lbs.; Tubes, 6 lbs.;
Transformer, 35 lbs.
Frequency Coverage:
Domestic model: 160, 80, 40,
30, 20, 17, 15 Meters. 10/12
Meters with modification.
Must present FCC license at
time of sale to obtain modifi-
cation details.
Third Order IMD at Rated
Output:
-34 dB at 1500 Watts Output.
AL-1200
Specifications:
Input:
Circuit type: Pi-network,
slug tuned coils. Maximum
VSWR at resonance: 1.2:1
or less. Minimum 2:1
VSWR bandwidth: 20% of
center frequency. Max.
drive power permissable:
130 Watts. Typical drive
for full power output: 90
Watts.
Output:
Circuit type: Pi-L. 1/2 hour
PEP two tone test: 1800
Watts. 30 second PEP two
tone test: 1800 Watts plus.
Power Supply:
Circuit type: Full wave
bridge, capacitor input. No
load voltage: 3600 Volts.
Full load voltage: 3300
Volts. Full load current: .8
Amp. Regulation: 10% or
better.
Transformer: 32 lb.
Hypersil
R
.
Capacitors: 26 uFd total,
computer grade. Maximum
draw at rated output: 13
Amps. AC Input: 240 V,
50/60 Hz.
Tubes:
Type: Eimac
R
3CX1200A7.
Continuous dissipation:
1200 Watts. Warm-up time:
5 seconds.
Metering:
Multimeter: Reads plate
current, plate voltage,
drive/ALC, power output
(PEP Watts). Grid Meter:
Reads grid current.
ALC:
Negative going, 0-20 Volts,
adjustable, phono jack.
Efficiency CW: 65%.
*Efficiency SSB (envelope
crest): 62%.
MARS/WARC:
Yes, set to the nearest band.
Connectors:
Keying: Engages amplifier
when grounded, +12 VDC
open circuit and supplies 100
mA when grounded, built-in
back-pulse cancelling diode
protects the exciter.
RF input:
SO-239, 50 Ohm input.
Power:
NEMA 5-15P, 240 Volts.
Dimensions:
18
1
/
2
Dx17Wx10H inches.
Operating Weight:
77 pounds.
Shipping Weight:
Unit, 50 lb., Tube, 5 lb.,
Transformer 35 lb.
Frequency Coverage:
Domestic model: 160, 80, 40,
30, 20, 17, 15 Meters. 10/12
Meters with modification.
Must present FCC license at
time of sale to obtain details.
Third Order IMD at Rated
Output: -34 dB at 1500
Watts output.
AL-1500
Specifications:
Input:
Circuit type: Pi-network,
slug tuned coils. Maximum
VSWR at resonance: 1.3:1
or less. Minimum 2:1
VSWR bandwidth: 20% of
center frequency. Max.
drive power permissable:
100 Watts. Typical drive
for full power output: 65
Watts.
Output:
Circuit type: Pi-L. 1/2 hour
continuous carrier: 1500
Watts. 30 second continu-
ous carrier: 2500 Watts
plus. 1/2 hour PEP two tone
test: 2500 Watts plus. 30 sec-
ond PEP two tone test:
2500 Watts plus.
Power Supply:
Circuit type: Full wave
bridge, capacitor input. No
load voltage: 3600 Volts.
Full load voltage: 3300
Volts. Full load current: 1
Amp. Regulation: 10% typ-
ical. Transformer: 32 lb.
Hypersil
R
. Capacitors: 26
uFd total, computer grade.
Maximum draw at rated
output: 15 Amps. AC
Input: 240 V, 50/60 Hz.
Tubes:
Type: Eimac
R
3CX1500/8877. Continuous
dissipation: 1500 Watts.
Warm-up time: 180 sec-
onds.
Metering:
Multimeter: Reads plate
current, plate voltage,
drive/ALC, power output
(PEP Watts). Grid Meter:
Reads grid current.
ALC:
Negative going, 0-20 Volts,
adjustable, phono jack.
Efficiency CW: 65%.
*Efficiency SSB (envelope
crest): 62%.
MARS/WARC:
Yes, set to the nearest ama-
teur band.
Connectors:
Keying: Engages amplifier
when grounded, +12 VDC.
100 mA when grounded,
built-in back-pulse cancelling
diode protects the exciter.
RF input:
SO-239, 50 Ohm input.
Power:
NEMA 6-15P, 240 Volts.
Dimensions:
18
1
/
2
Dx17Wx10H inches.
Operating Weight:
77 pounds.
Shipping Weight:
Unit, 50 lb., Tube, 3 lb.,
Transformer 35 lb.
Frequency Coverage:
Domestic model: 160, 80, 40,
30, 20, 17, 15 Meters. 10/12
Meters with modification.
Must present FCC license at
time of sale to obtain details.
Third Order IMD at Rated
Output: -36 dB.
ALS-600
Specifications:
Frequency Coverage:
(US) 1.5 to 22 MHz continu-
ous; (Export) 1.5 to 30 MHz
continuous.
Input:
Circuit type: Broadband,
resistor swamped.
Maximum VSWR at reso-
nance: 1.5:1. Bandwidth:
Broadband. Maximum
drive power permissible:
100 Watts. Typical drive
for rated output: 100 Watts.
Output:
Circuit: Broadband, low
pass. Typical SSB PEP
voice operation: 600 Watts
PEP. Typical CW opera-
tion: 500 Watts.
Power requirement for
amplifier:
50 VDC, 25 Amps, +/-14
VDC, 1 Amp.
Output devices:
Power MOSFET (4) MRF-
150.
Metering:
Amplifier-Cross-needle
meter for VSWR, Forward,
reflected true peak indicating
wattmeter.
ALC:
Negative going 12 VDC,
adjustable, RCA phono jack.
Efficiency CW: 50%.
Efficiency SSB: (envelope
crest) 55%.
MARS/WARC:
Yes, continuous coverage.
Keying:
Relay closure or sinking to
ground of +12 VDC at 100
mA, RCA phono jack.
Power Supply connector:
Beau multi-contact male
chassis mount.
RF Connectors:
SO-239 for input and output.
Dimensions:
12Dx9
1
/
2
Wx7
1
/
8
H inches.
Operating Weight:
12.5 lbs.
Shipping Weight:
18 lbs. (amp only).
Third Order IMD at rated
Output:
-35 dB PEP or better.
ALS-600PS
Power Supply
Specifications:
Line Input:
120 VAC/240 VAC.
Output: 50 VDC, 25 Amps,
+/-14 VDC, 1 Amp.
Metering:
Cross-needle for volt/amp.
Output Cable:
6 foot prewired cable with
Beau multi-contact connector
to mate with ALS-600 ampli-
fier.
Dimensions:
12Dx9
1
/
2
Wx6H inches.
Operating Weight:
32 lbs.*
Shipping Weight:
37 lbs.*
AC Line Connector:
NEMA-5-15P.
Note:
* Total Shipping weight for
ALS-600 Amplifier and
ALS-600PS power supply is
57 lbs., shipped together.
ALS-500M
Specifications:
Frequency Coverage:
(US) 1.5 to 22 MHz continu-
ous; (Export) 1.5 to 30 MHz
continuous.
Input:
Circuit type: Broadband,
resistor swamped.
Maximum VSWR at reso-
nance: 1.5:1. Bandwidth:
Broadband. Maximum
drive power permissible:
100 Watts. Typical drive
for rated output: 60 Watts.
Output:
Circuit: Broadband, low
pass. Typical SSB PEP
voice operation: 500 Watts
PEP. Typical CW opera-
tion: 400 Watts.
Power requirement for
amplifier:
14-16 VDC, 80 Amps (peak).
Output devices:
Transistor, (4) 2SC2879.
Metering:
Current meter, 0-100 Amp.
ALC:
None. Efficiency CW: 40%.
Efficiency SSB: (envelope
crest) 45%.
MARS/WARC:
Yes, continuous coverage.
Keying:
Relay closure or sinking to
ground of +12 VDC at 100
mA, RCA phono jack.
Power Supply connector:
Beau multi-contact male
chassis mount.
Power Supply Cable: 8 foot
pre-wired with Beau connec-
tor on one end; other end
with 5/8 inch ring lugs, 10
gauge wire (x2), in line fuse
holders, fuses included.
RF Connectors:
SO-239 for input and output.
Dimensions:
15
1
/
2
Dx8
7
/
8
Wx3
3
/
4
H inches.
Operating Weight:
7.5 lbs.
Shipping Weight:
12 lbs.
Third Order IMD at rated
Output:
-35 dB PEP or better.
ALS-600SPS
Switching Power
Supply Specs:
Line Input:
120 VAC/240 VAC.
Output: 50 VDC, 25 Amps,
+/-14 VDC, 1 Amp.
Metering:
Cross-needle for volt/amp.
Output Cable:
6 foot prewired cable with
Beau multi-contact connector
to mate with ALS-600 ampli-
fier.
Dimensions:
14
1
/
2Dx9Wx6H inches.
Operating Weight:
10 lbs.*
Shipping Weight:
15 lbs.*
AC Line Connector:
NEMA-5-15P.
Note:
* Total Shipping weight for
ALS-600 Amplifier and
ALS-600SPS power supply
is 33 lbs., shipped together.
* Exact performance measurements may vary due to the accuracy of test equip-
ment and the measurement methods used.
(Prices and specifications subject to change without notice or obligation).