Specifications
8 http://www.ameritron.com
Just turn on and operate -- no warm-up, no
tuning, instant bandswitching. Compact.
Ameritron's ALS-500M solid state mobile amp
gives you 500 Watts PEP SSB or 400 Watts CW
output! Covers 1.5-22 MHz, (10/12 Meters
with MOD-10M, $29.95 kit, requires FCC
license). Mail with order to Ameritron.
Virtually indestructible! Load Fault Protection eliminates
amplifier damage due to operator error, antenna hitting tree branch-
es, 18-wheeler passing by. Thermal Overload Protection
disables/bypasses amp if temperature is excessively high. Auto resets.
Typically 60-70 watts in gives full output. ON/OFF switch
bypasses amplifier for "barefoot" operation. Extremely quiet fan
comes on as needed. Excellent harmonic suppression, push-pull
output, DC current meter. 13.8 VDC/80 Amps. Super-compact
3
1
/
2x9x15 inches. 7 pounds.
ALS-500M, $849, 500 Watt mobile amp.
ALS-500MR, $879, ALS-500M mobile amp plus ALS-500RC Remote
Head for full manual remote control.
ARF-500K, $179.95, Remote kit for older ALS- 500M mobile
amps with serial # below 13049. Includes filter/relay board for
ALS-500M, AL-500RC Remote Head, cables, hardware, instructions.
ARF-500K2, $289.95. Includes ARF-500K Remote kit for older
ALS-500Ms plus ARI-500 Amplifier Radio Interface below.
New ARI-500, $119.95, Amplifier Radio Interface reads band
data from your transceiver so you can automatically
bandswitch your ALS-500M amplifier. See below inset.
Choose ARI-500 for fully automatic bandswitching or ALS-
500RC for manual remote control.
New ALS-500RC, $49,
Remote Head lets you mount
ALS-500M amplifier any-
where and gives you full
manual remote control. Select
desired band, turn On/Off and
monitor current draw on its DC
Current Meter. Power, transmit and overload LEDs. RJ-45 cables
plug into Amplifier/ Remote Head. Works with serial numbers
above 13049 (below 13049 requires the ARF-500K, see left).
ALS-500M
$
849
Suggested Retail
ALS-500RC
$
49
Suggested Retail
Let your rig auto bandswitch
your ALS-500M Amplifier
The Ameritron
ARI-500 Amplifier
Radio Interface
reads band data from your Icom, Yaesu, Kenwood or Alinco
transceiver so they can remotely and automatically bandswitch
your ALS-500M amp.
Lets you mount your ALS-500M out-of-the-way in your trunk.
Works with serial numbers above 13049 (below 13049
requires the ARF-500K, see above).
Yo u can add the ALS-500RC for manual bandswitching and
data monitoring, etc, see left description.
AMERITRON mobile no tune Solid State Amp
500 Watts, Instant bandswitching, no tuning, no warm-up, SWR protected, 1.5-22 MHz . . .
NEW! ARI-500 Amplifier Radio Interface reads transceiver band data -- automatically band-
switches ALS-500M amp . . . NEW! ALS-500RC Remote Head gives total remote control!
ARI-500
$
119
95
Suggested Retail
AAmmeerriittrroonn
precision peak-reading
SSWWRR WWaattttmmeetteerrss
Ameri-tron’s
flat Mobile Peak
Reading
SWR/Wattmeter
is just 1
5
/
8” thick
-- easily mounts
on your dash-
board for easy
viewing.
Flat mount
on wall or shelf
in your ham shack for best viewing
angle.
Remote sensor with 25 feet thin,
flexible cable lets you place sensor
and coax out-of-the-way.
Handles full 1500 Watts, 1.8-30
MHz. Lighted Cross-Needle meter.
Active electronics lets you read
true peak or average power in
3000/300 Watt ranges. Has “High
SWR” LED. Flat-Mount wattmeter
measures 5Wx3
1
/
4H x1
5
/
8D”; remote
sensor is compact 3
1
/
2Wx2
3
/
4H x2
3
/
4D”. Use 9V battery or 12 VDC.
Ameritron
painstakingly designed
the AWM-30 to make
accurate and precise
power measurements.
Designed-in-accu-
racy is the result of a
carefully designed
directional coupler, an
accurate active peak
reading circuit and a
precision d’Arsonval
meter movement.
Ameritron’s
AWM-30 reads true-peak or average power on a large illuminated
three inch Cross-Needle meter. Handles 1500 Watts, 1.8 to 30
MHz. Has 3000/300 Watt ranges. Reads forward and reflected
power and SWR on highly visible dual cross-needle meter move-
ment.
Remote sensor with cable lets you conveniently place sensor.
Battery saver turns unit off with no RF applied. Uses 12 VDC or 9
volt battery (not included). Beautiful wrap-around custom metal
cabinet looks great in your shack. Measures a compact
4
1
/2Wx4
1
/2Hx5
1
/2D inches.
Flat Mount Mobile SWR/Wattmeter
Base Station 1500 Watt SWR/Wattmeter
Remote sensor
AWM-35
$
159
95
Suggested Retail
AWM-30
$
149
Suggested Retail
New!