UPC for Wal-Mart models. 5555155COM VVVVVVVVVVVVVVVVVVVVVVV B345555155COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Vo Not RetVrV ThiV ProdVct! Contact our customer service team for help Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST ViVit: www.ameriwoodhome.com WARNING - Unit can over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help AVVembly TipV Call VV! 1-800-489-3351 Monday-Friday 9am - 5pm CST You Tube ViVit ameriwoodhome.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly. - Compression dowels are lightly tapped in with a hammer.
k Quic bly m Asse Ti p Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size A B x1 T5995196010 TOP PANEL C x1 T5995196020 BOTTOM PANEL D x1 T5995196030 SIDE LEFT PANEL E x1 T5995196040 SIDE RIGHT PANEL F x1 T5995196050 PARTITION PANEL G x1 T5995196060 BACK PANEL x4 T5995196070 STRETCHER PANEL ameriwoodhome.
Board Identification Not actual size I H x6 T5995196080 DRAWER BOX BACK J x6 T5995196090 DRAWER BOX RIGHT K M L x6 T5995196110 DRAWER SUPPORT x1 T5995196130 UPPER DRAWER FRONT LEFT x6 T5995196120 DRAWER BOTTOM N O P x2 T5995196150 LOWER DRAWER FRONT LEFT x1 T5995196140 UPPER DRAWER FRONT RIGHT x6 T5995196100 DRAWER BOX LEFT Q x2 T5995196160 LOWER DRAWER FRONT RIGHT R x1 T5995196170 CENTER LEG ameriwoodhome.
Part List Actual Size 1 2 3 x14 TTA0003 Cam Lock 15-11.5 x26 TTA0001 Cam Bolt 5 x8 TTA0046 SCREW JCBC M6 X 50 (BLK) 13 x84 TTA0005 CBS 3.5 x 12 (RB) 6 9 4 7 10 x60 TTA0016 DOWEL 6 X 30 14 15 ameriwoodhome.
Step 1 10 3 x4 TTA0016 DOWEL 6 X 30 2 1 x2 x12 TTA0003 TTA0005 CBS 3.5 x 12 Cam Lock x2 TTA0001 Cam Bolt 15 x3 TTA0048 Drawer Slide 350 BLK Insert two cam lock, two screw cam bolt, and four dowel into the panel as shown. Attach drawer slide with twelve screw to the side panel as shown. C Quick Assembly Tip Proper orientation of CAM LOCK x3 SETS ameriwoodhome.
Step 2 10 3 2 x4 x12 TTA0016 TTA0005 DOWEL 6 X 30 CBS 3.5 x 12 1 x2 TTA0003 Cam Lock 15 x2 TTA0001 Cam Bolt x3 TTA0048 Drawer Slide 350 BLK Insert two cam lock, two screw cam bolt, and four dowel into the panel as shown. Attach drawer slide with twelve screw to the side panel as shown. D Quick Assembly Tip Proper orientation of CAM LOCK x3 SETS ameriwoodhome.
Step 3 10 3 2 1 15 x3 + x3 CR x4 TTA0016 DOWEL 6 X 30 x24 x2 TTA0005 TTA0003 CBS 3.5 x 12 Cam Lock i) Insert two screw cam bolt, Attach drawer slide Right with twelve screw to the left surface of partition panel as shown. CL x4 TTA0001 Cam Bolt x6 pcs TTA0048 Drawer Slide 350 BLK ii) Insert two cam lock, two screw cam bolt, and four dowel into the panel as shown. Attach drawer slide Left with twelve screw to the right surface of partition panel as shown.
Step 4 Quick 2 Assembly 10 x8 TTA0003 Cam Lock Tip x12 TTA0016 DOWEL 6 X 30 Proper orientation of CAM LOCK Insert two cam lock, and three dowel into the panel as shown. X4 set G ameriwoodhome.
Step 5 Attach two stretcher (G) to the side left panel from step 1 as shown. G G C ameriwoodhome.
Step 6 Attach the components from step 5 to the left surface of partition from step 3 as shown. E G G C ameriwoodhome.
Step 7 Attach two stretcher (G) to the side right panel from step 2 as shown. G G D ameriwoodhome.
Step 8 Attach the components from step 7 to the components from step 6 as shown. C G G E G G ameriwoodhome.
Step 9 14 5 9 x4 TTA0046 SCREW JCBC M6 X 50 8 x4 TTA0053 WASHER (BLK) M6 X 20 R x4 TTA0047 SPRING WASHER (BLK) i) Attach the wood leg (R) to the side of base bottom (B) as shown. ii) Attach the center leg (Q) to the center of base bottom (B) as shown. R Q B ameriwoodhome.
Step 10 14 5 x4 TTA0046 SCREW JCBC M6 X 50 9 8 x4 TTA0053 WASHER (BLK) M6 X 20 x4 TTA0047 SPRING WASHER (BLK) R Attach the wood leg (R) to the side of base bottom (B) as shown. R B ameriwoodhome.
Step 11 6 x6 TTA0011 CBS M4 x 38 Attach the components from step 10 to the components from step 8 as shown. D E B C ameriwoodhome.
Step 12 1 16 x6 TTA0001 Cam Bolt x1 set TTA0026 ANTI TIPPING KIT A Insert six cam bolt and one set anti-tipping kit into the top panel as shown. ameriwoodhome.
Step 13 Attach the top panel (A) from step 12 to the components from step 11 as shown. A ameriwoodhome.
Step 14 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 11 x28 TTA0018 NAILS 6/8” Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown. F Note: Flip the chest over from the previous step before attaching the back panel. ameriwoodhome.
Step 15 13 x6 TTA0030 DRAWER BRACKET J 11 x6 Set J Attach the drawer bracket to the six sets of drawer side left (J) as shown. ameriwoodhome.
Step 16 13 x6 TTA0030 DRAWER BRACKET Insert the drawer bracket to the six sets of drawer side right (I). 10 I I 10 x5 x6 SetSet ameriwoodhome.
Step 17 1 10 x24 TTA0016 DOWEL 6 X 30 x6 TTA0001 Cam Bolt Insert one screw cam bolt, and four wood dowels to the five set of drawer back (H). H x6 Set ameriwoodhome.
Step 18 6 x12 TTA0011 CBS M4 x 38 Attach the six sets of drawer back (H) to the six sets of drawer side right (I) as shown. H I ameriwoodhome.
Step 19 6 x12 TTA0011 CBS M4 x 38 Attach the drawer side left (J) to the six sets of the components from step 18 as shown. H I J x6 Set ameriwoodhome.
Step 20 12 10 x12 TTA0016 x12 TTA0004 Cam Lock 12-9.5 Insert two cam lock, and two wood dowels to the six sets of drawer support (K). K x6 Set ameriwoodhome.
Step 21 Attach the drawer support (K) to the six sets of the components from step 19 as shown. K x6 Set ameriwoodhome.
Step 22 Insert drawer bottom (L) to the six sets of components from step 21 as shown. L x6 Set ameriwoodhome.
Step 23 M x1 Set N x1 Set 1 x6 TTA0001 Cam Bolt i)Insert one screw cam bolt to the Upper-drawer front left (M), and Upperdrawer front right (N) as shown. N ii)Insert one screw cam bolt to the Lower-drawer front left (O), and Lower drawer front right (P) as shown. O ameriwoodhome.
Step 24 7 x8 TTA0013 PHCB 4 X 12 M x1 Set N x1 Set Attach the Upper Drawer Front Left (M) and Upper Drawer Front Right (N) from step 23 with screw PHCB to the components from step 22 as shown. ameriwoodhome.
Step 25 4 17 x4 TTA0014 M4 x 20 (RB) x4 TTA0050 VAUGHN KNOB M Attach two Vaughn Knob with panhead zink to the Upper Drawer Front Left (M) & Upper Drawer Front Right (N) from step 23 as shown. ameriwoodhome.
Step 26 7 O x2 Set P x2 Set x16 TTA0013 PHCB 4 X 12 (RB) Attach Lower Drawer Front Left (O) & Lower Drawer Front Right (P) from step 24 with screw PHCB to the four sets components from step 22 as shown. ameriwoodhome.
Step 27 4 17 x8 TTA0014 M 4 x 20 x8 TTA0050 VAUGHN KNOB O P x2 Set x2 Set Attach two Vaughn Knob with panhead zink to the four sets of Lower Drawer Front Left (O) & Lower Drawer Front Right (P) as shown. ameriwoodhome.
Step 28 15 3 x6 SETS DRAWER SLIDE 350 BLK x36 TTA0005 CBS 3.5 x 12 x6 Set Attach the drawer slide to the bottom of sets components from step 24 & 26 as shown. ameriwoodhome.
5555555COM VVVVVVVVVVVVVVVVVVVVVVV Step 29 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING hole Serious or fatal crushing injuries can occur from furniture tipover.
Step 30 RIGHT N x 1 SET P x 2 SET LEFT M x 1 SET O x 2 SET Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs. 34 kg 36 lbs. 16 kg Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
ReViVter yoVr prodVct to receive the followiVV: * New treVd detailV ‐VVeak peek oV what'V Vew * SVrveyV ‐have a voice withiV oVr commVVity * ExclVVive dealV aVd diVcoVVt codeV * QVick aVd eaVy replacemeVt part Vervice To reViVter yoVr prodVct, viVit ameriwoodhome.
Español CVbierta VelaVtera Este libro de instrucciones para referencia en el futuro. información IMPORTANTE de seguridad. Por favor lea y manténgalo No ReVreVe eVte prodVcto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 Lunes -Viernes 9am -5pm CST ViVitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 9 I) Inserte dos tornillos de leva de tornillo, Fije la corredera del cajón hacia la derecha con un tornillo de doce a la superficie izquierda del panel de partición como se muestra. Ii) Inserte dos cerraduras de leva, tornillo de leva de dos tornillos y cuatro clavijas en el panel como se muestra. Cuelgue el cajón deslizante hacia la izquierda con el tornillo de 12 a la superficie derecha del panel de partición como se muestra.
Español Página 23 Insert one screw cam bolt, and four wood dowels to the five set of drawer back (H). Página 24 Fije los seis juegos de la parte posterior del cajón (H) a los seis juegos del lado del cajón derecho (I) como se muestra. Página 25 Fije el lado del cajón izquierdo (J) a los seis conjuntos de los componentes del paso 18, como se muestra. Página 26 IInserte dos cerraduras de leva y dos clavijas de madera en los seis juegos de soporte del cajón (K).
Español Página 35 IMPORTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER À PRÉVENIR LE BASCULEMENT. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI-BASCULEMENT FOURNI AVEC CE PRODUIT. ATTENTION BleVVVreV par écraVemeVt VraveV oV mortelleV peVveVt Ve prodVire par le reVverVemeVt deV meVbleV.
Français CoVvertVre AvaVt CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retoVrVez paV ce prodVit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐VoVV: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale ViVitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 9 I) Insérez un boulon à vis à deux vis, Fixez le tiroir glissant Droit avec douze vis sur la surface gauche du panneau de séparation comme illustré. II) Insérez deux serrures à cames, deux boulons à vis et quatre chevilles dans le panneau tel qu’illustré. Glissière tiroir à tiroir Gauche avec douze vis à la surface droite du panneau de séparation comme illustré. Page 10 Insérez deux serrures à cames et trois chevilles dans le panneau, comme indiqué.
Français Page 25 Fixez le côté du tiroir vers la gauche (J) sur les six ensembles des composants de l’étape 18 comme indiqué. Page 26 Insérez deux serrures à cames et deux chevilles en bois aux six jeux de support de tiroir (K). Page 27 Fixez le support de tiroir (K) aux six ensembles des composants de l’étape 19 comme indiqué. Page 28 Insérez le fond du tiroir (L) sur les six ensembles de composants à partir de l’étape 21, comme indiqué.
Français Page 35 OPCION 1: Para asegurar en una viga de la pared (método preferido). Use un detector de vigas, localice la viga en la pared. Coloque la unidad contra la pared y alinee con el soporte de seguridad en esta ubicación. Para hacer este proceso más fácil, se puede perforar un agujero piloto de 1/8” de diámetro (3mm) a través del soporte de seguridad hacia la viga en la pared. Atornille el tornillo a través del soporte de seguridad y hacia la viga en la pared.