Instructions / Assembly

5995096COM
Vaughn 6 Drawer Dresser
35
ameriwoodhome.com
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture pover.
To prevent pover:
* Install pover restraint provided
* place heaviest items in the lowest
drawers
* Unless specically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a me
Use of pover restarints may only
reduce, but not eliminate the risk
of pover
hole
stud
wallboard
OPTION 1: Aachment into a wall stud (preferred method)
Using a stud nder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this locaon.
To make driving the screw easier, you can drill a 1/8” diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
ghened in step 5.
OPTION 2: Aachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16” diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole unl it is ush.
Move your unit into locaon and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully ghtened in step 5.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
aach the safety bracket.
Step 29