7920403COM 16" cabinet B347920403COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com WARNING - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size E C Shelf 37360015050 Top 37360015030 D B A Bottom 37920015040 Left Panel 37360015011 F Right Panel 37360015021 Adjustable Shelf (3) 37360015060 This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. H G Back Panel K73601500 Door 37920403070 systembuild.
Board Identification Not actual size This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. H C B E F A F F G D systembuild.
Part List Actual Size 6 2 1 (x8) #A22620 cam lock 7 3 4 (x8) #A12420 (x4) #A12930 (x8) #A22610 5/8" screw cam bolt 8 (x33) #A21110 nail 5 (x2) #A17400 7/8" screw 7/8" bolt (x4) #A13410 1-3/4" screw 9 (x12) #A80250 shelf support (x2) #A89210 door pad Not Actual Size 10 12c 11 12a 12d (x1) #A50395 12b (x4) #A44135 handle (x1) adjustable foot 12 #A84050 safety bracket kit 13 (x3) #A65700 hinge systembuild.
STEP 1 2 13 (x3) #A65700 (x4) #A22610 NOTE: The hinges can be mounted on either the left panel or right panel, depending on which way you want the door to open (right or left). Shown is for the hinges to be mounted on the left panel. Separate hinges by depressing end of hinge and removing the hinge plate from the hinge arm. hinge arm brazo de la bisagra bras de la charnière hinge plate placa de la bisagra plaque de charnière press to release hinge plate. 2 A 2 2 2 systembuild.
STEP 2 2 (x4) #A22610 2 B 2 2 2 systembuild.
STEP 3 1 12a 12b Do not fully tighten this screw in this step. 12b (x8) #A22620 (x1) #A84050 12a 1 1 C 1 1 1 E 1 Quick Assembly Tip Proper orientation of CAM LOCK systembuild.
STEP 4 UNLOCK LOCK C A E finished edge B finished edge systembuild.
STEP 5 3 11 4 (x8) #A12420 (x4) #A12930 4 (x4) #A44135 Unscrew the two piece foot as shown. After top part of foot is attached to bottom shelf, screw on bottom part of foot. Be sure all four feet are level with each other. 3 3 11 D systembuild.
STEP 6 6 (x4) #A13410 6 B A D 6 6 6 finished edge systembuild.
STEP 7 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 7 WARNING Please make sure that the Backs are attached securely. All nails must be driven into the parts straight and tightened firmly. Failure to do so could cause instability, product collapse, and/or serious injury. (x33) #A21110 AVERTISSEMENT Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown.
STEP 8 12c 8 12d (x12) #A80250 12d (x1) #A84050 hole agujero trou 12c #2 #1 stud montante planche 8 wallboard muro mur 8 Option 1; Securely screw (12C) into solid area of the wall as shown. F 8 8 F Option 2: Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall anchor(12d) into the hole until it is flush. Fasten the wall bracket (12a) to the wall anchor (12d) with the screw (12c). Now fully tighten screw (12b) from step 3. F systembuild.
STEP 9 13 (x3) #A65700 G 13 systembuild.
STEP 10 10 5 (x1) #A50395 (x2) #A17400 hook gancho crochet 10 G A 5 systembuild.
STEP 11 To adjust the doors, remove the cover on the back of the hinge arm to expose the two adjusting screws. To adjust the doors up and down, loosen the hinge plate screws. Move the door the direction needed and retighten the screws on the hinge plates. To adjust the doors sideways, turn the large adjustment screw on the hinge arm clockwise or counter clockwise, depending on the sideway direction needed. The small adjustment screw needs to be loosend or tightened in conjunction with the larger screw.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 9 0 lbs. 0 kg. (x2) #A89210 40 lbs. 18.1 kg. 9 35 lbs. 15.8 kg. 50 lbs. 22.7 kg. Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 7 NOTA: Las bisagras se pueden montar en el panel izquierdo o el panel derecho, dependiendo la manera que usted quisiera que la puerta se abriera (derecho o izquierdo). Se muestra para que las bisagras sean montadas en el panel izquierdo. Separe las bisagras presionando el extremo de la bisagra y quitando la placa de la bisagra del brazo de la bisagra. Página 11 Desatornille el pie de dos piezas como se muestra.
Español Página 19 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite systembuild.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.systembuild.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 7 NOTE: Les charnières peuvent être montées sur le panneau gauche ou le panneau droit, selon la façon dont vous voulez que la porte ouvre (droite ou gauche). L'illustration montre les charnières montées sur le panneau gauche. Séparez les charnières en desserrant l'extrémité de la charnière et en enlevant la plaque de charnière du bras de la charnière. Pressez pour dégager la plaque de charmière Page 11 Dévissez la patte en deux parties comme montré.
Français Page 18 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé pour une utilisation avec une télévision.
