Instructions / Assembly

6
B347363414COM
0
10 /15
?? www.systembuild.com ??
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
Option 2:
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap
the wall anchor(13b) into the hole until it is flush. Fasten
the wall bracket (13a) to the wall anchor (13b) with the
screw (13d).
Opcion 2:
Taladre un agujero de 3/16" de diámetro (5mm) en la
pared. Golpea la ancla de pared (13b) en el agujero
hasta que sea parejo. Abroche la escuadra de pared
(13a) al la ancla de la pared (13b) con el tornillo (13d).
Option 2:
Percez un trou de 3/16" de diamètre (5 mm) dans le
mur. Enfoncez l'ancrage mural (13b) dans le trou
jusqu'à ce qu'il soit à égalité avec le mur. Fixez le
support mural (13a) à l'ancrage mural (13b) avec la vis
(13d).
Option 1;
Securely screw (13d) into solid area of the wall as
shown.
Opción 1;
Firmemente el tornillo (13d) en el área sólida de la
pared como mostrado.
L'option 1;
Solidement vis (13d) dans région solide du mur
comme montré.
13a
13b
x
13 1
13c
13d
13a
13b
13d