5360307COM Night Stand B345360307COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1‐800‐489‐3351 (toll free) Monday‐Friday 9am ‐ 5pm CST Visit: www.ameriwoodhome.com WARNING ‐ Unit can tip over causing severe injury or death. ‐ Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐800‐489‐3351 Monday‐Friday 9am ‐ 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 1 HOUR ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size B A Left Panel 35360307010 D C Top 35360307030 Right Panel 35360307020 Bottom 35360307040 E DWR SIDE F Drawer Front 35360307050 G x2 drawer Side 39991167346200C Drawer Bottom 39991340042110D This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. Back Panel K536030700 ameriwoodhome.
Board Identification Not actual size This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. C B G A D DWR SIDE DWR BACK F DWR SIDE ameriwoodhome.
Part List Actual Size 2 3 1 6 4 (x4) #A22570 cam lock (x4) #A22510 cam bolt 7 (x2) #A17400 7/8" pan head (x4) #A21660 wood dowel 9 (x4) #A23030 confirmat 5 (x20) #A12120 #8 x 7/16" pan head (x20) #A21110 (x10) #A11080 #6 x 7/16" flat head 10 (x4) #A21970 drive fastener Not Actual Size 11a 13 Left Cabinet Member (x1) #A52695 11b Right Cabinet Member handle 12 11c Left Drawer Member 11d Right Drawer Member (x1) 11 #A56770 Drawer Slide Kit ameriwoodhome.
STEP 1 3 1 (x2) #A22570 5 (x2) #A21660 (x3) #A11080 11a Marked with a "L" Left Cabinet Member (x1) #A56770 Quick Assembly Tip Proper orientation of CAM LOCK 1 A 5 3 finished edge ameriwoodhome.
STEP 2 3 1 5 11b Marked with a "R" Right Cabinet Member (x2) #A22570 (x2) #A21660 (x3) #A11080 (x1) #A56770 Quick Assembly Tip Proper orientation of CAM LOCK 1 B 5 finished edge 3 11b ameriwoodhome.
STEP 3 2 2 (x4) #A22510 2 2 C 2 ameriwoodhome.
STEP 4 UNLOCK LOCK A B C finished edge ameriwoodhome.
STEP 5 9 9 9 (x4) #A23030 9 D finished edge 9 A B C ameriwoodhome.
STEP 6 4 14 14 (x12) #A12120 (x4) #A44500 D ameriwoodhome.
STEP 7 6 (x20) #A21110 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. Carefully position the unit on it's front. Flush the bottom edge of the back panel with the bottom edge of the bottom (D). Align squarely and nail (6) straight into back edges as shown. Assure that the unit is square. Distance from corner to corner are equal. 6 raw surface facing up G Flush edge of back panel with edge of bottom. finished edge ameriwoodhome.
STEP 8 12 4 (x4) #A12120 (x2) #A54520 4 4 12 4 12 4 ameriwoodhome.
STEP 9 4 (x4) #A12120 Be sure the groove in the drawer sides are centered with the groove in the drawer front. If needed, loosen screws (4) in the drawer front, make needed adjustment and re‐tighten screws. 4 DWR SIDE DWR SIDE E 4 ameriwoodhome.
STEP 10 Slide the drawer bottom (H) into the groove of the drawer sides and drawer front. F unfinished surface DWR SIDE E ameriwoodhome.
STEP 11 10 (x4) #A21970 You will need to tap with a hammer to fasten. 10 10 DWR BACK DWR SIDE 10 10 DWR SIDE ameriwoodhome.
STEP 12 7 11c Left Drawer Member 5 13 11d Right Drawer Member (x4) #A11080 (x1) #A56770 (x2) #A17400 (x1) #A52695 Marked with a "R" Attach slides before handle. 5 Marked with a "L" DWR SIDE 7 5 DWR SIDE 7 E 11c 13 ameriwoodhome.
STEP 13 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. cabinet member roller drawer runner roller ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 40 lbs 18.1 kg 25 lbs 11.3 kg 25 lbs 11.3 kg Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1‐800‐489‐3351 (Gratis) Lunes ‐ Viernes 9am ‐ 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 13 ¡IMPORTANTE! EL PANEL POSTERIOR ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE CORRECTAMENTE. Coloque cuidadosamente la unidad sobre la parte frontal. Coloque el borde inferior del panel posterior sobre el borde inferior del fondo (D). Alinee en línea recta y meta el clavo (6) en los bordes traseros como se muestra. Asegúrese de que la unidad está cuadrada. La distancia de esquina a esquina debe ser la misma. Alinee el borde del panel trasero con el borde de la parte inferior.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐nous: 1‐800‐489‐3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 13 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CETTE UNITÉ ET DOIT ÊTRE INSTALLÉ CORRECTEMENT. Positionnez soigneusement l'unité sur son front. Alignez le bord inférieur du panneau arrière avec le bord inférieur du bas (D). Alignez carrément et clouez (6) directement dans les bords arrières, tel qu'illustré. Assurez‐vous que l'unité est carrée. La distance d'un coin à l'autre est égale. Alignez le bord du panneau arrière avec le bord du bas.