Thank you for purchasing from AMERIWOOD. Visit www.ameriwood.com to view the limited warranty valid in the U.S. and Canada. BEFORE STARTING -Read each step carefully before starting. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. -Make sure all parts are included. Most board parts are labeled or stamped on the raw edge.
PARTS A SIDE FRAME T9897496010 QTY:2 M4.2 x 22 1 X4 SCREW TTL1084 M7 7 X1 WRENCH TTL5106 B TOP T9897496020 M4.2 x 9 M4.2 x 13 2 X8 3 X4 SCREW TTL1085 SCREW TTL1001 D C RAIL T9897496040 QTY:2 SHELF T9897496030 QTY:2 M4*12 4 X8 ANGLE BRACKET TTL9610 5 X1 6 X1 BOLT TTL2106 NUT TTL2108 M4.2 x 13 8 X8 THREAD CUTTING SCREW TTL1004 To view a video on how the CAM fastening system works, download a free QR-reader on your smartphone, then scan the code.
1x 2 -Attachfour Angle Brackets (4) to the Side Frame (A) with four screws (8) as shown. 8 4 A The screws used are thread cutting screws and may require some additional force in the first few turns. This is normal and after the initial turns the screws will turn in easily until tight.
2 -Attachtwo side frames (A) to the top (B) with four screws (1) as shown.
3 -Attachtwo shelves (C) to two side frames (A) with eight screws (2) as shown.
4 -Attachtwo rails (D) to the assembled unit with four screws (3), one bolt (5) and one nut (6) as shown.