UPC for Wal-Mart models. 5555555COM VVVVVVVVVVVVVVVVVVVVVVV B345555555COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Vo Not RetVrV ThiV ProdVct! Contact our customer service team for help Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST ViVit: www.ameriwoodhome.com WARNING - Unit can over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help AVVembly TipV Call VV! 1-800-489-3351 Monday-Friday 9am - 5pm CST You Tube ViVit ameriwoodhome.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly. - Compression dowels are lightly tapped in with a hammer.
k Quic bly m Asse Ti p Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size A B x1 T5994096010 BOTTOM PANEL x1 T5994096020 TOP PANEL D C x1 T5994096030 SIDE LEFT PANEL x1 T5994096040 SIDE RIGHT PANEL E F x1 T5994096050 BACK PANEL ameriwoodhome.
Board Identification Not actual size G H x1 T5994096070 UPPER STRETCHER PANEL x4 T5994096080 WOOD LEG I J x5 T5994096090 DRAWER BOX BACK x5 T5994096100 DRAWER BOX RIGHT K L x5 T5994096110 DRAWER BOX LEFT x5 T5994096120 DRAWER SUPPORT M M x5 T5994096130 DRAWER BOTTOM x1 T5994096140 UPPER DRAWER LOUVER FRONT O x4 T5994096150 LOWER DRAWER FRONT ameriwoodhome.
Part List Actual Size 1 2 3 x15 TTA0003 Cam Lock 15-11.5 x15 TTA0001 Cam Bolt 5 x70 TTA0005 CBS 3.5 x 12 (RB) 6 x8 TTA0046 SCREW JCBC M6 X 50 (BLK) 9 4 7 8 x20 TTA0013 SCREW PHCB 4 X 12 MM (RB) x24 TTA0011 CBS (BLK) M4 X 38 10 x8 TTA0053 (BLK) FLAT WASHER 6 X 20 X 1 13 x5 Sets TTA0030 DRW BRACKET AMERIWOOD A54223-116MM ameriwoodhome.
Step 1 10 3 x4 TTA0016 DOWEL 6 X 30 2 x20 TTA0005 CBS 3.5 x 12 (RB) 1 x2 TTA0003 Cam Lock 15-11.5 14 x5 TTA0001 Cam Bolt x5 TTA0048 Drawer Slide Q-Fit 350 BLK Insert two cam lock, five screw cam bolt, and four dowel into the panel as shown. Attach drawer slide to the side panel as shown. 3 C Quick Assembly Tip Proper orientation of CAM LOCK x5 ameriwoodhome.
Step 2 10 3 x4 TTA0016 DOWEL 6 X 30 1 2 x20 TTA0005 CBS 3.5 x 12 (RB) x2 TTA0003 Cam Lock 15-11.5 14 x5 TTA0001 Cam Bolt x5 TTA0048 Drawer Slide Q-Fit 350 BLK Insert two cam lock, five screw cam bolt, and four dowel into the panel as shown. Attach drawer slide to the side panel as shown. 4 D Quick Assembly Tip Proper orientation of CAM LOCK x5 ameriwoodhome.
Step 3 2 Quick 10 x1 TTA0003 Cam Lock 15-11.5 Assembly Tip x6 TTA0016 DOWEL 6 X 30 Proper orientation of CAM LOCK Insert one cam lock, and six dowel into the panel as shown. G ameriwoodhome.
Step 4 2 Quick 10 x10 TTA0003 Cam Lock 15-11.5 Assembly Tip x20 TTA0016 DOWEL 6 X 30 Proper orientation of CAM LOCK Insert two cam lock, and four dowel into the panel as shown. x5 Set F ameriwoodhome.
Step 5 Note: Hole facing Up F G Attach five stretcher (F) and upper stretcher (G) to the components from step 1 as shown. F F F F 3 ameriwoodhome.
Step 6 Attach the side right panel (D) components from step 2 to the components from step 5 as shown. D 4 ameriwoodhome.
Step 7 13 5 x4 TTA0046 SCREW JCBC M6 X 50 (BLK) 9 8 x4 TTA0053 FLAT WASHER 6 X 20 X 1 (BLK) x4 TTA0047 SPRING WASHER M6 (BLK) Attach wood leg (H) to the side of base bottom (A) as shown. H A H ameriwoodhome.
Step 8 13 5 x4 TTA0046 SCREW JCBC M6 X 50 (BLK) 9 x4 TTA0053 FLAT WASHER 6 X 20 X 1 (BLK) 8 x4 TTA0047 SPRING WASHER M6 (BLK) H A H Attach wood leg (H) to the side of base bottom (A) as shown. ameriwoodhome.
Step 9 6 X4 TTA0011 CBS (BLK) M4 X 38 Attach the components from step 8 to the components from step 6 as shown. D C A ameriwoodhome.
Step 10 15 1 x1 Set TTA0026 AMERIWOOD ANTI-TIPPING BLACK 19 X 30 X 2 mm x5 TTA0001 Cam Bolt Insert five screw cam bolt, and anti-tipping into the panel as shown. B ameriwoodhome.
Step 11 Attach the components from step 10 to the components from step 9 as shown. B ameriwoodhome.
Step 12 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 11 x24 TTA0018 NAIL Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown. E Note: Flip the chest over from the previous step before attaching the back panel. ameriwoodhome.
Step 13 12 x5 TTA0030 DRAWER BRACKET K 11 x5 Set K Insert the drawer bracket to the five set of drawer side right (K). ameriwoodhome.
Step 14 12 x5 TTA0030 DRAWER BRACKET Insert the drawer bracket to the five set of drawer side right (J). 10 J J x5 Set ameriwoodhome.
Step 15 10 x20 TTA0016 DOWEL 6 X 30 Insert the four wood dowels to the five set of drawer back (I). I x5 Set ameriwoodhome.
Step 16 6 x10 TTA0011 CBS M4 x 38 Attach the five sets of drawer back (I) to the five set of drawer side right (J) as shown. I J ameriwoodhome.
Step 17 6 x10 TTA0011 CBS M4 x 38 Attach the drawer side left (K) to the five set of the components from step 16 as shown. I J K x5 Set ameriwoodhome.
Step 18 10 x20 TTA0016 Insert four wood dowels to the five set of drawer support (L). L x5 Set ameriwoodhome.
Step 19 Attach the drawer support (L) to the five sets of the components from step (17) as shown. L x5 Set ameriwoodhome.
Step 20 Insert drawer bottom (M) to the five sets of components from step 19 as shown. M x5 Set ameriwoodhome.
Step 21 7 x4 TTA0013 PHCB 4 X 12 Attach upper drawer front (N) with screw PHCB to the components from step 20 as shown. x1 Set N ameriwoodhome.
Step 22 4 16 x2 TTA0014 PH M4 X 20 x2 TTA0050 VAUGHN KNOB x1 Set Attach two Voughn Knob with panhead zink to the upper drawer front (N) as shown. N ameriwoodhome.
Step 23 7 x16 TTA0013 PHCB 4 X 12 Attach lower drawer front (O) with screw PHCB to the components from step 20 as shown. x4 Set O ameriwoodhome.
Step 24 4 16 x8 TTA0014 PH M4 X 20 x8 VAUGHN KNOB x4 Set Attach two Voughn Knob with panhead zink to the four sets of lower drawer front (O) as shown. O ameriwoodhome.
Step 25 14 3 x5 SETS TTA0048 DRAWER SLIDE 350 BLK x5 Set x30 TTA0005 CBS 3.5 x 12 Attach the drawer slide to the bottom of components from step 22 and 24 as shown. ameriwoodhome.
5555555COM VVVVVVVVVVVVVVVVVVVVVVV Step 26 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING hole Serious or fatal crushing injuries can occur from furniture tipover.
Step 27 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs. 23 kgs 36 lbs. 16 kgs Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
ReViVter yoVr prodVct to receive the followiVV: * New treVd detailV ‐VVeak peek oV what'V Vew * SVrveyV ‐have a voice withiV oVr commVVity * ExclVVive dealV aVd diVcoVVt codeV * QVick aVd eaVy replacemeVt part Vervice To reViVter yoVr prodVct, viVit ameriwoodhome.
Español CVbierta VelaVtera Este libro de instrucciones para referencia en el futuro. información IMPORTANTE de seguridad. Por favor lea y manténgalo No ReVreVe eVte prodVcto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 Lunes -Viernes 9am -5pm CST ViVitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 9 Inserte una cerradura de leva y seis clavijas en el panel como se muestra. Página 10 Inserte dos cerraduras de leva y cuatro clavijas en el panel como se muestra. Página 11 Sujete cinco camillas (F) y camilla superior (G) a los componentes del paso 1 como se muestra. Página 12 Sujete la pata de madera (D) al lado del fondo de la base como se muestra.
Español Página 25 Fije el soporte del cajón (L) a los cinco conjuntos de los componentes de la etapa (17) como se muestra. Página 26 Inserte el fondo del cajón (M) en los cinco conjuntos de componentes del paso 19, como se muestra. Página 27 Fije el frente superior del cajón (N) con el tornillo PHCB a los componentes del paso 20 como se muestra. Página 28 Conecte dos perillas de Voughn con el zink de panhead Al frente superior del cajón (N) como se muestra.
Español Página 32 mur, avec le support de sécurité aligné à cet endroit. Pour rendre la conduite de la vis plus facile, vous pouvez percer un trou pilote de 1/8" de diamètre (3 mm) à travers le support de sécurité dans la planche. Conduisez la vis à travers le support de sécurité dans le montant du mur. Serrer la vis qui n'a pas été Localisez votre meuble où désiré contre un mur et marquer le mur à travers le support de sécurité, puis déplacez votre meuble de côté.
Français CoVvertVre AvaVt CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retoVrVez paV ce prodVit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐VoVV: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale ViVitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 9 Insérez un verrou de caméra et six chevilles dans le panneau comme illustré. Page 10 Insérez deux serrures à cames et quatre chevilles dans le panneau comme indiqué. Page 11 Fixez cinq brancards (F) et le brancard supérieur (G) aux composants de l’étape 1 comme indiqué. Page 12 Fixez la patte de bois (D) sur le côté du fond inférieur comme illustré. Page 13 Fixez le pied de bois (H) sur le côté du fond inférieur (A) comme illustré.
Français Page 25 Fixez le support de tiroir (L) aux cinq ensembles des composants à partir de l’étape (17) comme indiqué. Page 26 Insérez le fond du tiroir (M) sur les cinq ensembles de composants de l’étape 19 comme indiqué. Page 27 Fixez le devant du tiroir supérieur (N) avec la vis PHCB aux composants de l’étape 20 comme indiqué. Page 28 Fixez deux Boutons Voughn avec un zink panoramique sur le devant supérieur du tiroir (N) comme illustré.
Français Page 32 OPCION 1: Para asegurar en una viga de la pared (método preferido). Use un detector de vigas, localice la viga en la pared. Coloque la unidad contra la pared y alinee con el soporte de seguridad en esta ubicación. Para hacer este proceso más fácil, se puede perforar un agujero piloto de 1/8” de diámetro (3mm) a través del soporte de seguridad hacia la viga en la pared. Atornille el tornillo a través del soporte de seguridad y hacia la viga en la pared.