Installation Guide

STEM
New Installation:
1) To mount on cabinet, drill 3/16in(4.8mm) hole
through cabinet.
2) For the stem, use a standard 5/16in(7.9mm)
drill bit and drill a clearance hole into the front
of the cabinet.
Replacement Installation:
1) For the stem, use a standard 5/16in(7.9mm)
drill bit and drill a clearance hole into the front
of the cabinet.
FOR CUP PULL TO SIT FLUSH ON CABINET:
CORRECT INSTALLATION
CLEARANCE HOLE
BP4235
17C_AM_0003