Specification

Page 2 of 7
Ames’
®
Blue Max
®
Tile and Floor
Pro
duct Name (as used on Label and List)
C
olor: Blue
Revision Date:
11-4-2022
GHS Safety Data Sheets (SDS)
SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS
SUBSTANCE / MIXTURE
Mixture
OTHER MEANS OF IDENTIFICATION
N. A.
CAS # / IDENTIFIERS
INGREDIENT NAME
% BY WEIGHT
CAS NUMBER
Proprietary Polymer*
75 – 90 %
Proprietary
Water
5 – 20 %
7732-18-5
Any concentrations shown in a range are to protect trade secret confidentiality or is due to batch variation. There are no
additional ingredients present, which within the current knowledge of the supplier and in the concentrations applicable,
are classified as hazardous to health and hence require reporting in this section.
* A specialty formulated water-base man-made rubber technology.
SECTION 4 – FIRST AID MEASURES
DESCRIPTION OF NECESSARY FIRST AID MEASURES
EYE CONTACT
Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and
easy to do so while rinsing. If eye irritation persists: Get medical attention from a
physician.
INHALATION
Remove affected individual(s) to fresh air. Get medical attention from a physician if
breathing difficulty develops.
SKIN CONTACT
Wash skin with soap and water. Remove contaminated clothing. Get medical attention if
irritation develops. Wash contaminated clothes before reuse.
INGESTION
If swallowed, rinse mouth thoroughly. Do not induce vomiting. Never give anything by
mouth to an unconscious person. Seek medical attention if irritation persists or if
concerned.
MOST IMPORTANT SYMPTOMS / EFFECTS, ACUTE AND DELAYED
EYE CONTACT
May cause eye irritation
INHALATION
With good ventilation, exposure to vapors not expected to cause adverse effects.
SKIN CONTACT
Prolonged skin exposure may cause skin irritation.
INGESTION
No hazards anticipated from swallowing small incidental amounts during use of this
product.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS, IF NECESSARY
EYE CONTACT
N/A
INHALATION
N/A
SKIN CONTACT
N/A
INGESTION
N/A
SECTION 5 – FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: SUITABLE MEDIA
To extinguish combustible residues of this product, use water fog, CO2, dry chemical, chemical
foam or alcohol-resistant foam
EXTINGUISHING MEDIA: UNSUITABLE MEDIA
N/A
SPECIFIC HAZARDS ARISING FROM THE
CHEMICAL
Under fire conditions, some components of this product may decompose. The smoke may
contain unidentified toxic and/or irritating compounds. Hazardous combustion products may
include and are not limited to hydrocarbons, CO and dense smoke.
SPECIAL PROTECTIVE ACTIONS FOR FIRE-
FIGHTERS
Keep people away. Isolate fire area and deny unnecessary entry. Containers of this material may
build up pressure if exposed to heat (fire). Use water spray to cool fire-exposed containers.
SPECIAL EQUIPMENT FOR FIRE-FIGHTERS
Wear self-contained breathing apparatus (SCBA) and full fire-fighting protective clothing. If
protective equipment is not available or not used, fight fire from a protected location or safe
distance.