TDS
Table Of Contents
- STOCK CODE
- SIZE
- 2” x 50’ Roll
- PS250
- 4” x 50’ Roll
- PS450
- Ames® Peel & Stick™ Seam Tape is a contouring, self-adhesive, heavy duty seam tape that is the perfect match with any of our coatings. Peel & Stick™ Seam Tape reinforces and creates a barrier over roof vents, flashings, seams in metal, or any crack or...
- Clean the surface and remove all loose paint, dirt, oil, and greases leaving surface clean and completely dry. Always run a test patch first in an inconspicuous area to ensure that proper adhesion occurs, and the product works to your satisfaction.
- Peel off the backing and line it up with the seam or crack. Press firmly over entire surface. Coat with appropriate Ames Research Laboratories coating. Coat 1 – 2” over the edges of tape.
- With weighted roll, roll out any air bubbles in surface. For Extreme air bubbles, with razor, create small puncture and apply weighted roller over bubble. Peel & Stick Seam compound will reseal itself.
- The information and specifications set forth in this Technical Data Sheet are based on tests conducted by or on behalf of Ames Research Laboratories, Inc. All information is subject to change and pertains to the product available at time of publicatio...
Technical Data Sheet
Peel & Stick™ Seam Tape
Ames Research Laboratories, Inc.
1891 16
th
St SE | Salem, OR 97302
888-345-0809 | productservices@amesresearch.com
8.2-TST 4/20/21
STOCK CODE
SIZE
PS250
2” x 50’ Roll
PS450 4” x 50’ Roll
Ames® Peel & Stick™ Seam Tape is a
contouring, self-adhesive, heavy duty seam
tape that is the perfect match with any of our
coatings. Peel & Stick™ Seam Tape reinforces
and creates a barrier over roof vents, flashings,
seams in metal, or any crack or gap. Changes
in temperature cause your home to expand
and contract. Ames® Seam Tape reinforces
these areas to resist cracking.
COLOR
Grey
ELONGATION
>500%
ADHESIVE
THICKNESS
23 mils
ADHESION
ASTM D330 - 9.8 pli
c.f.
SERVICE
TEMPERATURE
-70ºF to 300ºF
APPLICATION
TEMPERATURE
-20ºF to 150ºF
LOW
TEMPERATURE
FLEX
½” radius at -35ºF
SHELF LIFE
5 Years
SELF SEAL ABILITY
ASTM D1970 - Pass
PLIABILITY
No cracks in
membrane
C
lean the surface and remove all loose paint, dirt,
oil, and greases leaving surface clean and
completely dry. Always run a test patch first in an
inconspicuous area to ensure that proper adhesion
occurs, and the product works to your satisfaction.
• Peel off the backing and line it up with the seam or
crack. Press firmly over entire surface. Coat with
appropriate Ames Research Laboratories coating.
Coat 1 – 2” over the edges of tape.
• With weighted roll, roll out any air bubbles in
surface. For Extreme air bubbles, with razor, create
small puncture and apply weighted roller over
bubble. Peel & Stick Seam compound will reseal
itself.
The information and specifications set forth in this
Technical Data Sheet are based on tests conducted
by or on behalf of Ames Research Laboratories, Inc.
All information is subject to change and pertains to
the product available at time of publication. Please
contact Ames Research Laboratories to receive the
most recent Technical Data Sheet.
STOCK CODE
COVERAGE RATE
PS250
8.33 sq. ft.
PS450
16.67 sq. ft.
Product Description
Application Instructions
Stock Codes & Packaging
Coverage Rates
Characteristics
Disclaimer
Surface Preparation