Specification

ManualsBrandsAmes ManualsDeck Paint & RestorationSafe-T-Deck 1 gal. Granulated-Slip Resistant Waterproof Elastomeric Deck Coating in Red

USEFUL FOR:

• Roof Decks

• Stairs

• Decks

• Ramps

• Wood

• Concrete

ACRYLIC SKID

RESISTANT

SAFETY PAINT

ACRYLIC SKID

RESISTANT

SAFETY PAINT

Where to Use:

Decks

Roof Decks

Stairways

Walkways

Wheelchair Ramps

Porches & Patios

Concrete

Wood

Boat Decks

What Does it do:

• Preserves and protects

• Increases the strength of surface through

adhesion

• Seals out moisutre and renews the old

surface.

• Up to 300% Elastomeric

What is it:

• Acrylic Latex Safety Paint

• Skid resistant

• Waterbased

• Easy application

• Ready to use - no mixing required

• Water clean up

• 6 color variants and is tintable

Safe-T-Deck®

Manufactured by Ames Research Laboratories, Inc.

1891 16th St. SE Salem, OR 97302

Made with Pride in the USA

Research Laboratories, Inc. All illustrations, photographs, diagrams and written content are property of Ames

We are a green manufacturer of premium

grade, elastomeric coatings and paints for

waterprooﬁng roofs, walls, decks,

basements, and many other surfaces. We are

experts with over 27 years of experience in

waterprooﬁng. Our impervious coatings are

the highest quality. All products are

waterbase, water clean up and contain no

petroleum.

Finally, waterprooﬁng

that really works!

1-888-345-0809

www.amesresearch.com

Summary of content (2 pages)

PAGE 1
® Finally, waterprooﬁng that really works! • Acrylic Latex Safety Paint • Skid resistant • Waterbased • Easy application • Ready to use - no mixing required • Water clean up • 6 color variants and is tintable What Does it do: USEFUL FOR: • Roof Decks • Stairs • Decks • Ramps • Wood • Concrete Safe-T-Deck® What is it: ® ® We are a green manufacturer of premium grade, elastomeric coatings and paints for waterprooﬁng roofs, walls, decks, basements, and many other surfaces.
PAGE 2
Do It Yourself in Three Easy Steps To learn more application tips vist www.amesresearch.com 1. Surface Preperation 2. Seam Tape Joint & Cracks 3. Application Read all label instructions before beginning. Always run a test patch ﬁrst in an inconspicuous area to ensure that proper adhesion and drying occurs and the product works to your satisfaction. Do not proceed unless the product works totally to your satisfaction. Remove all loose paint, dirt, oil and grease leaving the surface clean and dry.