SDS

ManualsBrandsAmes ManualsBuilding materials5 Gal. White Snow Seal Elastomeric Reflective Reflective Roof Coating

Ames’

Snow Seal

Product Name (as used on Label and List)

Color: White

Revision Date: 4-30-2019

GHS Safety Data Sheets (SDS)

Page 1 of 11

SECTION 1 – IDENTIFICATION

PRODUCT NAME

Ames’

Snow Seal

OTHER MEANS OF

IDENTIFICATION

SS Color: White

END USE

Latex Paints & Coatings, Water Borne Dispersion

MANUFACTURER

Ames Research Laboratories, Inc.

Salem, Oregon 97302

Corporate Office:

1891 16

Street SE

Salem, Oregon 97302-1436

(503) 588-3330

EMERGENCY PHONE

NUMBER

1-888-345-0809 or Chemtrec 1-800-424-9300

SECTION 2 – HAZARD IDENTIFICATION

CLASSIFICATION

Acute Toxicity, Dermal – 5:

Serious Eye Damage/Eye Irritation – 2B:

Acute Toxicity, Inhalation – 5:

SIGNAL WORD

WARNING

HAZARD

STATEMENT

May be harmful in contact with skin

Causes eye irritation

May be harmful if inhaled

HAZARD

PICTOGRAMS

N.A. – No Symbol

PRECAUTIONARY

STATEMENT(S)

Wear protective gloves/protective clothing/eye protection/face

protection. Avoid breathing dust/fume/gas/mist/vapor/spray.

Use only outdoors or in well-ventilated area. If hands or other

body parts come in contact, wash thoroughly after handling.

IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do so. Continue

rinsing. If eye irritation persists: Get medical attention from a

physician.

IF ON SKIN OR INHALED: Call a POISION CENTER or

doctor/physician if you feel unwell

HAZARDS NOT

OTHERWISE

CLASSIFIED

N.A.

Summary of content (11 pages)

PAGE 1
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 1 – IDENTIFICATION PRODUCT NAME Ames’® Snow Seal® OTHER MEANS OF SS Color: White IDENTIFICATION END USE Latex Paints & Coatings, Water Borne Dispersion MANUFACTURER Ames Research Laboratories, Inc.
PAGE 2
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE / Mixture MIXTURE OTHER MEANS OF N. A.
PAGE 3
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 5 – FIRE FIGHTING MEASURES EXTINGUISHING MEDIA: Foam CO2, Dry chemical, Water, Fog Foam SUITABLE MEDIA EXTINGUISHING MEDIA: N/A UNSUITABLE MEDIA SPECIFIC HAZARDS None known. Some gases, hydrogen chloride, carbon ARISING FROM THE monoxide. CHEMICAL SPECIAL PROTECTIVE Containers exposed to fire should be kept cool with ACTIONS FOR FIREwater spray.
PAGE 4
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 7 – HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING PROTECTIVE Wear appropriate personal protective equipment. Use in well MEASURES ventilated areas. Keep out of reach of children. Use ventilation to keep exposure to airborne contaminants below applicable exposure limits. GENERAL HYGIENE Do not take internally. Wash thoroughly after handling.
PAGE 5
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE PHYSICAL STATE Thick latex liquid. Contains acrylic latex. COLOR White ODOR Slight ammonia odor ODOR THRESHOLD N/A pH 8.5-9.0 MELTING POINT N/A BOILING POINT 212° F FLASH POINT N/A. EVAPORATION RATE Similar to latex paint, water-based latex polymers.
PAGE 6
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 10 – STABILITY AND REACTIVITY REACTIVITY This product is not reactive under normal conditions CHEMICAL This product is stable under normal storage conditions. STABILITY POSSIBILITY OF Will not occur under normal conditions. HAZARDOUS REACTION CONDITIONS TO Long-term exposure to elevated temperatures. Long term exposure to elevated temperatures.
PAGE 7
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) DELAYED AND IMMEDIATE EFFECTS AND ALSO CHRONIC EFFECTS FROM SHORT AND LONG TERM EXPOSURE SHORT TERM EXPOSURE – N/A POTENTIAL IMMEDIATE EFFECTS SHORT TERM EXPOSURE – N/A POTENTIAL DELAYED EFFECTS LONG TERM EXPOSURE – N/A POTENTIAL IMMEDIATE EFFECTS LONG TERM EXPOSURE – N/A POTENTIAL DELAYED EFFECTS POTENTIAL CHRONIC HEALTH EFFECTS GENERAL N.A. CARCINOGENICITY N.A. MUTAGENICITY N.A.
PAGE 8
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 13 – DISPOSAL CONSIDERATIONS Review all local, state, and federal regulations concerning DISPOSAL health and pollution for appropriate disposal procedures. CONSIDERATIONS SECTION 14 – TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME Not regulated DOT TDG Mexico Classification Classification Classification Not regulated. Not regulated.
PAGE 9
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) PROPER SHIPPING NAME N.A SHIP TYPE N.A POLLUTION CATEGORY N.A SECTION 15 – REGULATORY INFORMATION U.S. FEDERAL REGULATION OSHA Hazardous by definition of Hazard Communication Standard (29 CFR 1910.
PAGE 10
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) SECTION 16 – OTHER INFORMATION HMIS HEALTH FLAMMABILITY RATINGS 1 0 REACTIVITY 0 PERSONAL PROTECTION B EUROPEAN PRECAUTIONARY PICTOGRAMS General: If spraying or in poorly ventilated area: PREVIOUS SDS REVISION DATE REASON FOR REVISION VOLATILE ORGANIC COMPOUNDS (VOC’S) LEGEND ABBREVIATIONS USED NOTICE TO READER 2-15-2018 N.A. < 25 grams/liter N.A. – Not Applicable, N.E.
PAGE 11
Ames’® Snow Seal® Product Name (as used on Label and List) Color: White Revision Date: 4-30-2019 GHS Safety Data Sheets (SDS) implied, is given, the information presented here applies only to the product as shipped. The addition of a material can change the composition, hazards and risks of the product. Regulatory requirements are subject to change and may differ between various locations and jurisdictions.