Owner manual

Installation and Programming Manual

Appendix A: Error Messages

Error Conditions (306)

If the monitor displays “SEr320” one of four error conditions relating to the resolver has

occurred. These conditions include primary open, primary shorted, S1, and S4 open or shorted.

To have the monitor display the error condition which has occurred, perform the following

steps:

1. Select the function key.

The monitor displays “F-----”.

2. Select function number 306. Select the enter key.

The monitor will display the exact condition which has occurred. The

following are the possible errors:

P OPEn (Primary Open)

P Shrt (Primary Shorted)

S4OPEn (S4 Open)

S1OPEn (S1 Open)

(F)

↵

306

Chart A-7 LDT-Specic Error

Error Displayed Error Description Solution

SEr331 An error has occurred on the input

device. Fault pulse received from

LDT.

Correct this error by placing the

magnet assembly back into the ac-

tive stroke area, and clear the error.

T13692 appendix a.indd 3/17/04, 6:54 AM54