Manual

AUTOMATION & PROCESS TECHNOLOGIES
®
Wiring Diagram
µ
Clawson, MI 48017 U.S.A.
AUTOMATION & PROCESS TECHNOLOGIES
µ
Part Numbering
7250V Digital Flex Stik Sensor
Dimension Drawing
1080 N. Crooks Road, Clawson, MI 48017-1097
Phone: [phone] Toll Free: 800.635.0289 Fax: [phone] www.ametekapt.com
Copyright 2010 by AMETEK Automation & Process Technologies. All Rights Reserved.
7250V.D5R
1/12.Z203
725
2 V D XXX F1 XXX X XX
Overall Length
In 1” increments i.e. 072 = 72”
Mounting Style
X = None
C = C Style
B = Fixed Bottom
Connector Style
D = 3/4” NPT Dual
S = 1/2” NPT Single (PVDF)
B = Fixed Bottom
7250
HR Digital Stik
Output Protocol
2 = 25 level readings
5 = 10 level readings
Span/Max Level
In 1” increments i.e. 072 = 72”
Number of Floats
F1 = 1 Float
F2 = 2 Floats
Special Mounting
XX = None
For B Mounting Style
S0 = Standard Stainless Steel
S1 = Mast Mount, SS
S2 = M.M. w/ Cordgrip, SS
Consult Factory for other options.
Material
V = PVDF
R1
Number of Temp Points
R1 = 1 Sensor
R5 = 5 Sensors
Variable positions from the bottom
of the tank.
Intrinsically Safe Entity Parameters
V
max
I
max
P
I
C
I
L
I
7.93 V 280mA 1.0 W 30.1µF 0µH
Accessories
Item Part Number
Weight Kit: for use with PVDF probes with OAL of 146” to 288”
316 Stainless Steel components, 2”d x 7”h weight and retaining pin.
(For use with X style mounting)
SD0517408
Weight Kit: for use with PVDF probes with OAL of 289” to 432”
316 Stainless Steel components, 2”d x 11”h weight and retaining pin.
(For use with X style mounting)
SD0517411
Weight Kit: for use with PVDF probes with OAL of 433” to 600”
316 Stainless Steel components, 2”d x 14”h weight and retaining pin.
(For use with X style mounting)
SD0517414
Float: PVDF split ring and screws. (For use with C style mounting) SD0511000
Float Spacer: Nitrophyl spacer to maintain required distance between upper
and lower float magnets on 289” to 840” F2 probes.
M0890400
316ss Product Float: 2.05” dia., 0.54 sg, 350 psi. 14020002
316ss Gasoline/Water Interface Float: 2.05” dia., 0.85 sg, 350 psi. SD0437900
NBR Product Float: 3.85” dia., 0.30 sg, 50 psi. P0090800
NBR Gasoline/Water Interface Float: 3.85” dia., 0.85 sg, 50 psi. SD0559402
NOTE: The surface of the isolating material (PVDF) exceeds the limit of 4cm² as
specied in EN 50284 and the probability of electrostatic charging needs to be
considered for use in Category 1 (Zone 0).
Maximum Standard Overall Length = 840"
Minimum Standard Overall Length = 47"