Owner manual

Accessories
Item Part Number
Float: 316 Stainless Steel,2.05” dia., 0.56s.g. 14020002
Weight Kit: for use with PVDF probes with OAL of 146” to 288”
316 Stainless Steel components, 2”d x 7”h weight and retaining pin.
(For use with “X” style mounting)
SD0517408
Weight Kit: for use with PVDF probes with OAL of 289” to 432”
316 Stainless Steel components, 2”d x 11”h weight and retaining pin.
(For use with “X” style mounting)
SD0517411
Weight Kit: for use with PVDF probes with OAL of 433” to 480”
316 Stainless Steel components, 2”d x 13”h weight and retaining pin.
(For use with “X” style mounting)
SD0517413
Float Spacer: PVDF split ring spacer and screws.
(For use with “C” style mounting)
SD0511000
Wiring Diagram
Signal Name Pigtail Cable
Loop (-) Black
Prgm Input White
Loop (+) Red
Part Numbering
7330V Pro-Stik II Flexible PVDF
Dimension Drawing
1080 N. Crooks Road, Clawson, MI 48017-1097
Phone: [phone] Toll Free: 800.635.0289 Fax: [phone] www.AMETEKAPT.com
Copyright 2005 by AMETEK AUTOMATION & PROCESS TECHNOLOGIES. All Rights Reserved. Made in the USA.
7330V.D3R
6/09.Z177
733 0 V S E 072 F1 072 X XX
Overall Length*
ie. 072 = 72”
Min 20” Max 480”
Mounting Style
X = None
C = Temperature Constrained (0-40ºC) Version
Connector Style
S = 1/2” NPT Single for
housing mounting
(For “C” mounting style only)
D = 3/4” NPT Dual for
housing and vessel mounting
(For “X” mounting style only)
Fittings
E = English
M = Metric
7330
Pro-Stik II
Output
0 = 4 to 20mA
1 = 20 to 4mA
Span*
ie. 072 = 72” (Min 7” Max
454”. Max span is equal
to overall length minus the
Null Zone and Dead Band)
# of Floats
F1 = 1 Float
Special Mounting
XX = None
Material
V = PVDF (polyvinylidene fl uoride)
Consult factory for other options.
* NOTE: Span and OAL in 1” increments only.