Principles of Operation The Series 925 Linear Cable Reel can be used in any linear application up to 1200 inches. The system consists of a heavy duty spring motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. This shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor.
Part Numbering 925 100 A1 X S 12 Cable Reel Sensor Hardware Type A1 = 0 - 96 inch Stroke A2 = 97 - 192 inch Stroke B1 = 193 - 480 inch Stroke Single Spring B2 = 193 - 480 inch Stroke Double Spring C = 481 - 1200 inch Stroke Active Stroke in Inches Initial Cable Lead in Inches First 72 inches of intial lead is no charge. Cable lead above 72 inches an additional charge per inch. Leave blank if no initial cable lead required.
Dimensions “A” Version (stroke 96” or less) 2.50 1.50 .50 SEE VIEW "A" VIEW "A" .26 .20 .38 SLOT 4 PLACES .19 1.86 .42 2.11 THROAT CLEAR 5.94 6.46 SPECIFY INITIAL CABLE LEAD ACTIVE STROKE AS SPECIFIED GEAR REDUCER ACCESS CABLE REPLACEMENT ACCESS 1.48 5.06 CONNECTOR (MS-3102E-16S-1P) 6.13 5.08 8.04 “A” Version (stroke 97” to 192”) 2.50 1.50 VIEW "A" .50 SEE VIEW "A" .20 .26 .38 SLOT 4 PLACES .19 1.86 .42 THROAT CLEAR 2.11 6.48 5.
Dimensions “B” Version 3.12 16.00 15.00 INITIAL CABLE LEAD 2.00 STANDARD .41 4 PLACES SEE VIEW "A" 8.50 7 PIN CONNECTOR 11.47 VIEW "A" 1.86 2.11 .19 1.89 5.18 3.19 * * .42 ADD 1.75 (FOR "B2" STYLE UNITS THROAT CLEARANCE 12.82 .20 “C” Version 3.12 18.60 19.60 2.00 .41 4 PLACES 10.69 SEE VIEW "A" VIEW "A" 7 PIN CONNECTOR 2.11 1.86 1.89 6.34 15.22 4.94 .42 THROAT CLEAR .19 .
Sensor Type Single Turn Resolver Cable reel sensor with single turn resolvers are setup so that the full stroke of the cable reel is equal to approximately 350 degrees rotation of the resolver. The resolver signal is fed to a converting device, like the Gemco Series 2500 PLS. The Series 2500 can be scaled to display the linear motion of the cable reel sensor. Example: A 20 ft.. stroke cable reel sensor is specified to be used with our Series 2500 PLS. Desired accuracy is .01 ft.
Mounting & Sheave Assemblies SHEAVE ASSEMBLY MOVING MEMBER CABLE REEL SENSOR CABLE REEL SENSOR MOVING MEMBER SHEAVE ASSEMBLIES SHEAVE ASSEMBLIES CABLE REEL SENSOR CABLE REEL SENSOR MOVING DEVICE MOVING DEVICE SHEAVE ASSEMBLIES HORIZONTAL MOUNT P/N PSD-0102600 .38 DIA. MTG. HOLES (4 PLACES) 2.00 2.00 3.00 5.47 6.22 0.25 0.70 VERTICAL MOUNT P/N PSD-0102500 3.38 DIA. 1.03 4.05 3.15 2.37 2.36 0.19 .38 DIA. MTG. HOLES (4 PLACES) 2.06 2.
® AUTOMATION & PROCESS TECHNOLOGIES 1080 N. Crooks Road, Clawson, MI 48017-1097 Phone: 248-435-0700 Toll Free: 800-635-0289 Fax: 248-435-8120 www.AMETEKAPT.com 925.B2R 10/05.