Service manual

EBS - MARK II
1-3Released:01/2013
E-mail: [e-mail]; webside: www.amfreece.com
Phone: [phone]; Fax: [phone]
A - INTRODUCTION
If you have long hair, bind them in the way it cannot be caught and trapped by the driving
mechanism.
Buttons (hooks) on the sleeves always keep on, to avoid the danger of wrapping loose
clothing to the drive mechanism.
Do not work on the machine impaired or intoxicated.
2.2. DELIVERY SAFETY INSTRUCTIONS
When unwrapping the machine, follow the marks and symbols on the box and wrapping.
Visible damages of the consignment caused during shipment must be reported to the
freight forwarder immediately. Check the content of the consignment with the order and
inform the manufacturer on any discrepancies. Later claims will not be accepted!
2.3. INSTALLATION AND MAINTENANCE SAFETY INSTRUCTION
The machine is fitted with a filter to suppress noise according to the standards (EMC -
ÈSN 50081-1 and 50081-2). In case there is a circuit breaker connected in the power
system, it must be the type for devices with stray current and with high resistance to
surge current in the operational conductor (i.e., “S” type).
If there is a need to remove any of the safety covers, switch off the main switch, and
possibly unplug the machine from the electricity.
It is strictly forbidden to connect any connector while the machine is switched on and
under voltage! Electrical parts and motors may get damaged.
Make sure that electricity supply and its dimensioning and protection provide stable
electricity supply necessary for reliable machine performance.
2.4. DAILY OPERATION SAFETY INSTRUCTIONS FOR OPERATOR
Do not connect the machine onto power supply, if any of the safety covers is removed.
Check there are no bare electrical cables that could cause injury.
If you are not sure about proper operational procedure, it is necessary to call a mechanic.
The user has to ensure the lightning of minimum 750 Luxes.