Service manual

EBS - MARK II
1-10 Released:01/2013
E-mail: [e-mail]; webside: www.amfreece.com
Phone: [phone]; Fax: [phone]
A - INTRODUCTION
9.11.There are information labels glued
on the machine - refer to A3 – draw-
ing attention on additional hazards.
Do not remove or damage the la-
bels. If any label is damaged, order a
new one. Nevertheless, the referred
arrangements cannot cover all the
safety aspects and thus it is essential
for both the operator and technician
to understand this manual before op-
erating the machine. Mistakes made
during the machine installation and
operation will be eliminated this way.
Do not try to run the machine before
reading all the manuals supplied with
the machine and understanding each
function and practice.
9.12. We recommend an AMF Reece qual-
ified service engineer to supervise
the machine installation and initial
training of your technicians and op-
erators.
Table A
10. SPECIAL EQUIPMENT
10.1. Work light
- standard light can be ordered separately, order
number12.0008.4.875