Service manual

EBS - MARK II
1-50
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
1.11. OTHER MOTORS ADJUSTMENT
Remaining motors test screen enables user to adjust and test vertical chuck movement motor,
button feeding motor, and thread tension motor. Remaining motors test screen is protected
by password level III, see chapter E 1.2.1. To enter other motors test screen press icon
on
the service menu screen.
a) Information in point
provides user with current vertical position of chuck, button loader
and thread tension position.
b) Icons in point
are used to test particular movements in all directions.
c) Icons in point are used to set home position in case position of a respective sensor shut-
ter position change.
d) Icons in point
are used for electronic adjustment of home positions within the range ±
1.5 mm for vertical chuck position, ± 5.0° for button loader and ± 1.5° for thread tension.