Service manual

EBS - MARK II
1-51
Released:01/2013
E-mail: [e-mail]; webside: amfreece.com
Phone: [phone]; Fax: [phone]
E - STANDARD MACHINE
NOTE!
During the machine adjustment proceed in the same order as the following chapters are
arranged in this manual.
2. PNEUMATIC CYLINDERS ADJUSTMENT
WARNING!
All the adjustments must be carried out only after turning off the main switch
Non-professional actions can damage the electronic components and also the mechanisms
in the machine
CAUTION!
Follow the safety regulations valid in the particular plant
During the adjustment it is advisable to take out the needle for those procedures where
the needle is not required.
During the warranty period do not adjust the yellow - marked parts and follow the safety
regulations
2.1. CHUCK ROTATION ADJUSTMENT
Adjust chuck horizontal position using the nut
, so that it is parallel with the bedplate .
Adjust chuck vertical position using the adjustment screw - the right position is depicted
below as X = 3 mm.