Service manual

1-22
S100
Revised 10/2005
e-mail: [e-mail] ; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
D - MACHINE ADJUSTMENT
2. ADJUSTMENT OF THE STITCHES DENSITY IN THE EYE
This mechanism is not used for machine S 100 - 052 and S 100 - 053.
1. Fold the rear cover.
2. Loosen the screws  and . Move with shim  forward operator and the stitch density will de
crease.
3. Tighten the screws
 and .
3. ADJUSTMENT OF THE STITCHES DENSITY IN CROSS BAR
(modification S 100 - 060)
1. Lift the machine head.
2. Loosen the nut
. Move rod stud 
with lever  in ring  to centre of
ring or from centre of the ring.
By moving the lever to the centre the
stitches density is decreased,
by moving the lever form the centre
the stitches density is increased.
3. Tighten the nut .
2
1
1 2






