Service manual

e-mail: [e-mail]; [e-mail] ; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
Revised 09/2004
S-101
1-17
TO ADJUST THE TRIP LEVER
To equalize the ends of the stitching loosen nut n
on stop screw o and screw in or out as required.
TO CORRECT DISTORTION OF EYE
Loosen nut p and move stud in slot of lever r until shape of eye is correct.
TO ADJUST THE ROLL PRESSURE ON LENGTH
GAUGE
Crank the machine until it is in the stopping position, turn
the R.H. knurled stitch wheel until it is locked and wheel
will not turn further. When in this position roll s should just
barely rest on gauge t but be free to revolve.
Adjustment may be
made with screw u
- depressing the
screw will lift the
roll - raising the
screw u will lower
the roll
n
o
u
qp
r
s
t
MACHINE ADJUSTMENTS - CORRECTIVE AND MAINTENANCE