Service manual

e-mail: [e-mail]; [e-mail] ; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
Revised 09/2004
S-101
1-31
Needles for the Reece Series 101 machines are packaged and sold in boxes of 100, in sizes and types listed. They
are superior struck groove cosntruction, chrome plated and are spotted and the eye except size 00 and finer. When
ordering, specify quantity .. (100, 200 etc.) and give the Needle E.D.P. Number.
TYPE APPLICATION
E.D.P.
NUMBER
CODE
NUMBER
NEEDLE
BLADE SIZE
ROUNU POINT
LONG SHANK
02-0500-1-000
02-0500-1-100
02-0501-1-110
500-LS-000
500-LS-00
501-LS-0
Extra Fine
Very Fine
Fine
ROUND POINT
02-0501-0-111
02-0501-0-112
02-0501-0-113
501-1
501-2
501-3
Medium
Heavy
Very Heavy
ROUND POINT
BALL EYE
Applicable to closely women fabrics or where
sewing is over heavy seams. Particularly in
cottons. In sewing, the BalI Eye produces a
hole in the fabric slightly in excess of the
needle blade diameter, thereby raducing
needle heating below that of a needle with
uniform blade diameter.
02-0502-0-111
02-0502-0-112
02-0502-0-113
502-1
502-2
502-3
Medium
Heavy
Very Heavy
ROUND POINT
DOUBLE
GROOVE
The Double Groove needle should be used
only when conditions justify it because it
casts a smaller loop than standard needles
and may introduce skipping. For this reason
looper points should be set close to needle
blade. This needle is used on materials having
a tendency to trap the thread in its desent into
the work which affects the thread takeup or
causes the thread to break at the needle's
eye.
02-0503-0-111
02-0503-0-112
02-0503-0-113
503-1-DG
503-2-DG
M3-3-DG
Medium
Heavy
Very Heavy
EXTRA LONG
POINT BALL
EYE
Applicable to fabrics which offer high resis-
tance to needle penetration. AIso recom-
mendad in cases where fast timing of the
loopers is necassary. This needle differs from
the 501 type needle only in length from the
eye to the point.
02-0504-0-111
02-0504-0-112
02-0504-0-113
504-1
504-2
504-3
Medium
Heavy
Very Heavy
BALL POINT
LONG SHANK
024505-1-100
02-0505-1-110
505-LS-00
505-LS-0
Very Fine
Fine
BALL POINT 02-0505-0-111 505-1 Medium
ROCKED
POINT BALL
EYE
Applicable to leather and similar materials
where conventional sharp pointed needles
tend to leave excessive punctures. The split
made by Rockad Point needles in Ieather will
tend to close up after penetration. This needle
permits a higher stitch density than is
possible in leather with a Rournd Point needle.
02-0506-0-111
02-0506-0-112
02-0506-0-113
02-0506-0-114
506-1
506-2
506-3
506-4
Medium
Heavy
Very Heavy
Extra Heavy
SPEAR POINT
Applicable to fabrics containing a high per-
cantage of starch or similar substances which
tend to cause needle heating or resistance to
proper pulling up of the stittches.
02-0508-0-111
02-0508-0-112
02-0508-0-113
508-1
508-2
508-3
Medium
Heavy
Very Heavy
Applicable to the majority of women fabrics,
knits and other materials of similar con-
sistency. The Long Shank needles have
added stiffness in the blade which petmits the
use of one size smaller needle than would be
normally required. Long Shank needles can
not be used on heavy matatial that would be
panetrated by the tapered portion of the
needle shank.
Applicable to synthetic fabrics, particularly of
the tightly women or tightly knitted types
where the fibers of the materiaI are subject to
demage by conventional sharp pointed
needles. The Long Shank needles of this type
have the advantages stated above for Round
Point Long Shank needles.
NEEDLES