Service manual

Revised 07/2010
E-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
S-105
1-4
A - INTRODUCTION
NOTICE: If you use threads 100 thick or less, the manufacturer recommend using the left looper order
number 11.4005.0.005
3. TECHNICAL CONDITIONS
S-105 Mechanical eyelet buttonhole machine with chain stitch can be used on men and ladies’ garments. Gimp
can be also used.
With a simple change, the following types of buttonholes can be sewn:
- flybar - without bar
- with eye - with eye
- without eye - without eye
Description
Parameters
12 - 38 mm
3,0 to 7,0 mm
cut before (CB),
cut after (CA)
- 0,50 to + 0,5 mm
40 mm
02.0558.0.111 (Nm 90, 100, 110)
80, 100, 120,
gimp 30.
510 mm (height)
x 420 mm (width)
x 620 mm (depth)
750 mm (height)
x 1100 mm (width)
x 700 mm (depth)
+ 150 mm distance
According to IEC 364-3, IEC 364-5-51 temperature from +5°C to 40°C, relative air humidity from 30 to 8 0%
Up to 1800 spm
6 - 16 st/cm
Sewing speed
Stitch density
Buttonhole style
Buttonhole
type
Flybar lenght
Maximum clamp height
Maximum work thickness
Buttonhole cutting mode
Cutting space
Bedplate movement
Needle system
Recomended thread*
Operating condition
Machine db level
Machine head dimension
Machine head weight
Table dimension
Machine weight
Electrical requirements
Line circuit breaker
Stitch bite
Buttonhole
lenght
Stitch type
401
two thread chainstitch
4 to 12
1,8 to 3 mm
10 mm
to 6 mm
Yes
Max. 80 dB/ stoping 82 dB
130 kg
Without eye;
2,8 x 4,2 mm / 3,4 x 4,2 mm
3F+N+PE - 50Hz 400V/TN-S
Min. 10A Characteristic C (EN60947-2)
57 kg