Service manual

S-4000 TKF, LS Omron
1-16
Released 12/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
B - MACHINE ASSEMBLY
5. THREAD STAND INSTALLATION
1. Put the thread stand together
according to the drawing.
2. Position of the locking ring ➊
allows assembly of the thread
stand for various thickness of
the table top. Threaded end of the post
➏ must not extend more that 1 mm
(1/32) through the locking nut ➎.
3. Insert the washer ➋ and the post into
the hole provided in the right rear of
the table top ➌. Insert the washer ➍
and tighten the nut ➎ .