Service manual

S-4000 TKF, LS Omron
1-23
Released 12/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
D - MACHINE CONTROLS
4. THE PROGRAMMING MENU
Main screen - press , appears on the
display. To enter the programming menu, press . appears on the
display. The first line of the display shows the parameter, which is set, and the second line indicates the range
of setting. To scroll the lines down,press key, to scroll the lines up, press key. To change the
value of any parameter, press key. Press key to set the first digit. Press key. The second
di
git starts flashing on the display, to set the value, press
key. Press key. The third digit starts
flashing on the display. Repeat this setting until all ditigs of the parameter are set. To confirm the set value of
a parameter, press key.
Example: To change the sewing speed from 2000 to 3450
Display Press Display Press
3x
4x
5x
á
á
á
á
á
á
á
á
á
á
á
á