Service manual

S-4000 TKF, LS Omron
1-37
Released 12/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
E - MACHINE ADJUSTMENTS
10. THE CLAMP PLATE HOME POSITION
1. The home position of the clamp plate before sewing is:
a) the bevel gears Ê on the feed shaft are not engaged with the vertical bevel gear
b) the clamp plate is positioned all the way to the right (to the head casting)
2. If the bevel gears are engaged:
a) loosen the main shaft worm gear screws Ë, hold the worm gear and turn the hand wheel
clockwise or counterclockwise as needed
Note: If this adjustment is correct, the first needle puncture goes to the right slot of the throat
plate
Ë
Ê