Service manual

S-4000 TKF, LS Omron
1-52
Released 12/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
F - MACHINE MAINTENANCE
4. MACHINE LUBRICATION
1. It is necessary to lubricate the places shown below before the machine is switched on for the first time
or after a long idle period. Use oil ESSO TERESSO 32 or similar quality.
2. The amount of oil in the reservoir ➊ is indicated by the red mark. Too much oil may cause it to
overflow from the base area.
3. The reservoir is filled through the hole ➋ in front of the gauge.
4. The points for lubrication of the needle bar mechanism ➌ and draw-off mechanism ➍ are shown in
the illustration below (after opening the needle bar cover ➎). Lubricate the main cam worm gear
through the hole ➏. Lubricate all of these points every 8 hours.