Service manual

S-4000 TKF, LS Omron
1-53
Released 12/2009
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
5. Tilt the machine head onto the rest pin and lubricate the places shown in the picture.
➐ looper shafts feed cam surfaces
➑ shifter bite cam surfaces
➒ bevel gears trimmer shaft
➓ looper cam surfaces
Return the sewing head back into the sewing position
6. After lubrication it is important to sew a minimum of 10 sewing cycles on scrap fabric to dispel any
excess oil. Wipe all visible excess oil from the mechanism in the work area.
F - MACHINE MAINTENANCE