Service manual

1-47
S-104-100
Revised 09/2004
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
PRICK IN
2. Install the throat plate. Insert prick-in needle 02.0001.0.000 into the needle bar. The depth of the needle
into the needle bar should be set to allow just the point of the needle to penetrate the paper. Place a piece
of paper across the clamp area of the bedplate.
3. Turn the power on. Holding the piece of paper in place, cycle the machine to show the stitching pattern.