Service manual

1-73
S-104-100
Revised 09/2004
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
LOOPERS AND SPREADERS
5. Loosen screw A and move the left hand looper 1/2 the distance noted in step 3. Once the looper has
been moved, re-tighten screw A. Step 2 through 5 may need to be repeated in order to obtain equalization
of the loopers.
6. Moving the left hand looper away from the needle will bring the right hand looper closer to the needle.
Moving the left hand looper closer to the needle will move the right hand looper away from the needle.