Service manual

1-90
S-104-100
Revised 09/2004
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
SELECTING CUT BEFORE (CB) OR CUT AFTER (CA)
Selecting Cut Before (CB) or Cut After (CA)
Change from CB to CA
1. Move the bedplate to its home position.
2. Move the selector lever A, located on the left to the rear of the machine head, to the CA position.
3. Loosen bolt B and slide clamping arm C to the rear for the CA position. Once the clamping arm has
been moved backward, re-tighten bolt B.
Change from CA to CB
1. Move the bedplate to its home position.
2. Move selector lever A, located on the left to the rear of the machine head, to the CB position.
3. Loosen bolt B and slide clamping arm C forward for the CB position. Once the clamping arm has been
moved forward, re-tighten bolt B.