User's Manual

11
Status button
Press this button to begin an injection.
Lights will indicate the status of
your injection.
Green:
Ready to press and start injection.
Blinking green:
The needle is inserting and your injection
is in progress.
Red:
An error has occurred. See the
Troubleshooting section of this manual.
Progress bar
These stacked green bars are fully lit
when your injection starts, and the bar
of lights decrease as your injection is in
progress. The lights will disappear when
your injection is finished.
Speed switch
The AutoTouch Connect
TM
reusable
autoinjector allows you to choose from
three injection speeds. The pre-set speed
is medium.
(+) is faster
(•) is medium
(–) is slower