User's Manual

13
Sound switch
Sounds can be turned o and on.
(Sounds on) Slide switch down.
(Sounds o) Slide switch up so that the
red bar is visible.
Note: Error sounds will still be heard if
the sounds have been turned o.
Injection end
The entire injection end must be touching
your skin during injections. This is also
where the needle will come out.
Skin sensor
A skin sensor is located on the injection end.
When the injection end is placed on skin the
start button light will turn green. Hold the
injection end flat and steady on your skin
throughout the entire injection process.
Site light
When the Enbrel Mini
®
single-dose
prefilled cartridge is loaded and the
purple cap is removed, the injection
end will light up to help you see your
injection site.