User's Manual
17
How it works.
When you push the status button to start an
injection, the AutoTouch Connect
TM
reusable
autoinjector pushes a hidden needle out
of the Enbrel Mini
®
single-dose prefilled
cartridge into your skin. Then, a plunger
rod will push into Enbrel Mini, injecting
medicine into your body. After the medicine
is injected, the rod will pull back up and the
needle will withdraw from your skin. After
a successful injection all lights will turn off
and the door will open. The needle stays
hidden at all times during the injection
process.
What you will hear.
Needle insertion and plunger rod are
operated by motors. You will hear a motor
noise as the rod moves down and then
back up again. Whenever you hear a
motorized noise, you will know that an
injection is in progress.
What you will see.
During the injection, the viewing window
light will be on, and the plunger rod will
move through the window. Also during the
injection, the status light will be flashing
green, and the progress bar will decrease.
After a successful injection, the progress
bar, and status button will turn o, and
AutoTouch Connect will open the door.
If the status light turns red, and beeps
for more than a few seconds, an error
has occurred. Use the troubleshooting
section of this manual to see what to do if
thishappens.