User's Manual

27
Enbrel Mini
®
single-dose prefilled
cartridge will not eject.
Reason #1: If the viewing window has
no light, press the status button to wake
up AutoTouch Connect
TM
. Then press
and hold the door button for at least
two seconds to eject.
Reason #2: If Enbrel Mini does not
eject automatically at the end of an
injection, there may be a problem.
Call 1-888-4ENBREL (1-888-436-2735).
The purple cap is very hard
to remove.
The purple cap should not be removed
outside of the AutoTouch Connect
reusable autoinjector. It should
be removed after it is loaded into
AutoTouch Connect, when you are ready
to inject. If Enbrel Mini is loaded and
the purple cap is dicult to remove,
call 1-888-4ENBREL (1-888-436-2735).
The injection speed will not change
during injection.
Once the injection starts, the speed
cannot be changed. Always set the
speed prior to injection.
The injection is faster or slower
than expected.
The speed switch may have been
moved unintentionally. Check the speed
setting prior to starting each injection.