User's Manual
37
Quality of Service and SecurityInformation
The AutoTouch Connect
TM
autoinjector
establishes an authenticated and encrypted
connection with the Embark
®
app running on
a mobile device. Initial setup requires physical
access to the autoinjector labeled serial number
for user input at initial pairing/secure bonding.
The app will walk you through this setup
process.
Data is transferred from the autoinjector on a
one-to-one paired mobile device for ensuring
data integrity and quality of service (QoS).
Data transferred is read-only and no patient
information is stored on the autoinjector.
Data can be sent at any time, and temporary
loss of proper QoS will be resolved upon
resumed connection to the app. If connection
with the app drops and re-establishes, data
transfer resumes with data integrity verification.
Data transfer latency or asynchronization does
not aect drug delivery tracking as data will be
confirmed uponreconnection.
Electromagnetic Compatibility
Portable and mobile RF communications equipment
can aect medical electrical equipment. Avoid
operating AutoTouch Connect near microwave
ovens, wireless routers, babymonitors or other
common household electronics that operate
using RF transmission, including RFID emitters.
A minimum distance of 30 cm (12inches) is
recommended.
Avoid operating AutoTouch Connect near
highmagnetic or other fields such as those
around MRI, CAT, or PET scanners.
AutoTouch Connect emits RF.