User's Manual
40
Electrical characteristics
The AutoTouch Connect
TM
reusable
autoinjector uses a non-replaceable,
non-rechargeable DL123 Lithium
battery. The battery has a nominal
voltage of 3.0 V with a capacity
of 1400 mAh.
The autoinjector enclosure is a Type BF
applied part: The skin sensor and other
electronics are isolated from the skin.
Dimensions and weight
AutoTouch Connect weighs 0.4 pounds
(180 grams), and is 9 inches (228 mm)
tall by 1.5 inches (38 mm) wide by
1.8 inches (45 mm) deep.
Biocompatibility and
electrical isolation
The autoinjector enclosure is intended
to come into contact with the skin
(see Guide to Parts). It is a Type
BF applied part. This means that
it is electrically isolated from the
battery. The injection end and finger
grip of AutoTouchConnect are made
of ABS plastic. This material has
been biocompatibility-tested for skin
sensitivity and irritation.
Contraindications
This device is contraindicated for
use in a Magnetic Resonance (MR)
environment. For contraindications
of ENBREL
®
please refer to ENBREL
prescribing information.
Technical Information