User's Manual
Table Of Contents
A9230-D User Manual
© AMIC All rights reserved Page14 of 21 AMIC Proprietary / Confidential
Rev 1.0C
3.6 Connection Diagram
AMIC’s A9230-D reader system can be used in two different configurations. The first
configuration consists of one reader system on the RS-485 network. Reader address
needs to be in the default setting (software configurable, address = 0x01). The second
configuration consists of up to 255 readers maximum on the same RS-485 network. This
configuration requires the setting of the reader address through software to ensure that
each reader is using a unique address on the RS-485 network.
3.6.1 Single Reader System Configuration