User's Manual

A9240-A-004-485 User Manual
3. Hardware
3.1 Hardware Requirements
Single/Daisy-chain configuration minimum hardware requirement:
A9240-A-004-485 RFID reader x 1
RS-485 cable with RJ-45 connector
DC +19V power supply cable x 1
DC +19V power supply x 1 (not included)
Antenna with reverse TNC connector x 4 (not included)
PC or Laptop with RS-485 interface (not included)
Stand-alone configuration
1
minimum hardware requirement:
A9240-A-004-485 RFID reader x 1
RS-485 cable with RJ-45 connector
DC +19V power supply cable x 1
DC +19V power supply x 1 (not included)
Antenna with reverse TNC connector x 4 (not included)
Please note that the user supplied power supply should be capable of supplying at least
1.0A of current while maintain +19V DC voltage.
Note:
1. Not available at present time
© AMIC All rights reserved Page6 of 34 AMIC Proprietary / Confidential Rev 1.0