User's Manual

AMIC A9280-B-000 User Guide
© AMIC Dec. 2004 – All rights reserved p 9 of 19 Rev 1.0
Figure - 6
9. If “Init Fail” is being displayed in the dialog box to the right of the COM port
setting, the PDA has failed to initialize the CF reader through the specified COM
port. This could be caused by several reasons: a) the CF reader is not
positioned correctly in the CF slot. b) COM port conflict has occurred. Please
use another available COM port on the PDA. The available COM port for CF
reader is dependent on the type of PDA that you used. Please select another
available COM port and initialize the reader again.