Operation Manual

7
STANDBY
END
RUN
TEMPERATURE
SPIN
SPEED
1000
COLD
TROUBLESHOOTING GUIDE
The washing machine has been equipped with a system that with use of “Temperature” LEDs per-
forms signalling in case of some problems related with the incorrect operation.
Reason of displaying a code What you should do by yourself
I.The appliance will not operate
Now display !
lPower failure
l Insert correctly a plug into a socket.
l Check fuses located at home.
II.The appliance will not operate
III.Low pressure
lCheck pressure in the water supply
system.
lClean the mesh lter on the water sup-
plying hose.
lTurn the tap on completely.
IV.Pump lter clogged
lClean the lter.
V.Washing machine is overloaded
lClean the pump lter.
l Decrease the wash quantity.
Flashing signal light
Shining signal light
l Close the door appropriately.
STANDBY
END
RUN
TEMPERATURE
COLD
STANDBY
END
RUN
TEMPERATURE
COLD
END
RUN
TEMPERATURE
STANDBY
COLD
END
RUN
TEMPERATURE
STANDBY
COLD
END
RUN
TEMPERATURE
STANDBY
COLD
Code: shinning signal light 95
o
C + 60
o
C.
lThe door is not closed properly!
Code: shining light 95
o
C + COLD
Code: shinning signal light 95
o
C + 30
o
C
Code: shinning signal light 95
o
C + 40
o
C