Operation Manual
8
VI.No water in the washing machine
lOpen the tap.
lClean the mesh lter on the water
supplying hose.
VII.Washing interrupted
lClean the pump lter.
lClean the water outlet hose.
VIII.Water under washing machine
lTighten the pump lter.
lCheck the drain hose and fasten it if
nec essary
IX.Washing machine moves
lRemove the transport locking devices.
lPlace the machine in a perfectly hori zon-
tal position.
lLock the feet (tighten the locknuts).
X.Poor nal spin results
lClean the pump lter (see ma in te nan ce).
XI.Foam formation
lCheck water hardness and adjust
the dose of the washing agent.
lCheck water hardness.
XII.Poor washing results
lAdjust the dose of the washing agent to
the degree of soiling and water hardness
(see re com men da tions on the washing
agent packaging).
lSelect appropriate programme.
END
RUN
TEMPERATURE
STANDBY
COLD
END
RUN
TEMPERATURE
STANDBY
COLD
Code: shinning signal light 95
o
C + 60
o
C + COLD
Code: shining light 95
o
C + 60
o
C + 30
o
C
l Washing machine does not pump the water off.